4 ms·
Raspberry and Linux Drivers issues aside. This is 1.34Gbps on a 2x2 5Ghz 160Mhz WiFi 6 with theoretical speed of 2.4Gbps. I could get very close to 800Mbps on
by ksec 6y ago
Raspberry and Linux Drivers issues aside.
This is 1.34Gbps on a 2x2 5Ghz 160Mhz WiFi 6 with theoretical speed of 2.4Gbps. I could get very close to 800Mbps on my WiFi 6 on iPhone. So I was expecting 1.6Gbps with 160Mhz.
With Wireless speed over taking wired, we really need 2.5 /5Gbps Ethernet, but the move to these standards are so slow.
- Dirlewanger 6y agoWhat? Cat 6a is 10Gbps so the actual speed is probably more than 5Gbps.
- lostlogin 6y agoI think the parent post is referring to the low rate of adoption of >1gbps networking. Switching and routing is expensive and not many devices support it.
- amarshall 6y agoThey’re presumably referring to 2.5GBASE-T and 5GBASE-T. Some motherboards and WiFi 6 WAPs are now including NICs meeting these standards but not 10GBASE-T. Still not commonplace throughout, though. Both 2.5 & 5GBASE-T are rated for 100 m on CAT 5e. https://en.wikipedia.org/wiki/2.5GBASE-T_and_5GBASE-T https://en.wikipedia.org/wiki/2.5GBASE-T_and_5GBASE-T
- ksec 6y agoYes the point of NBASE-T or 2.5/5BASE-T is that it should be a lot cheaper than 10GBASE-T.
- wongarsu 6y ago10G Ethernet has gotten a lot cheaper, certainly viable for enthusiasts. I'm not sure what I would use it for except for faster access to my NAS, and that's coincidentally also the one device category where 10G ports are somewhat common. For everything else 1G per device seems plenty, and with Ethernet you actually get the advertised speeds in typical scenarios.
- jeroenhd 6y agoA network card for 10Gpbs costs at least €100 per device here, whereas 1Gbps goes for less than €10. A switch with at least 4x 10Gbps ports costs over €300 (whereas 4x 1Gpbs costs about €20). Using 2.5Gbps ports is more cost effective, with switches available at a third of the price of a 10Gbps version and network cards going for about half the price of a 10Gbps port. A literal 10x price increase is not exactly what I'd call "viable for enthusiasts". With 802.11ax, WiFi has surpassed ethernet for all practical purposes for end users. You can't _rely_ on ax working at full speed, but if you try it and it works, it's a whole lot cheaper and easier than setting up wired internet. It's sad, but this is only the case because network device vendors want to keep cashing in on "enterprise" hardware with ludicrous pricing. Prices have barely dropped over the last 4-5 years on many 10Gbps switches, probably because they're mostly used in data centres anyway. I've run into annoyances with 1Gbps ethernet a few times, usually when transferring large files between PC and laptop or from my NAS. After 10 years of universal gigabit ethernet, I somehow felt like it shouldn't be faster to copy everything from my laptop to an external SSD and then copy it back to my desktop than sending the data over a short wire connected to both computers, but here we are.
- kllrnohj 6y ago> A literal 10x price increase is not exactly what I'd call "viable for enthusiasts". As an "enthusiast" here that's because you should be looking at used gear. You can pick up things like the Mellanox Connectx-2 SFP+ used cards for cheap, like $20-30 USD (local availability is of course a crapshoot though). If you want/need 10Gbps over cat6, though, then yeah it gets more expensive. But if you're just looking for 10gbps between a couple of systems and can run a cable, SFP+ with some DAC cables are very much within reach. > With 802.11ax, WiFi has surpassed ethernet for all practical purposes for end users. You can't _rely_ on ax working at full speed, but if you try it and it works, it's a whole lot cheaper and easier than setting up wired internet. For all practical purposes it hasn't. Remember the airspace itself is shared. That old 802.11ac laptop or phone or whatever streaming youtube or netflix will murder your theoretical 802.11ax bandwidth. It's not unlike claiming that an 8-port gigabit switch is "8Gbps" (assuming a full-throughput switch, which is common-enough) - that's basically how wifi marketing speeds works. It's the shared available bandwidth, not the per-client bandwidth. If you actually care about bandwidth then 802.11ax is still going to be practically inferior to 1gbps ethernet runs. But for most people as long as the wifi is mostly faster than their internet connection, which is typically far less than 1gbps anyway, then who cares? More significantly latency with wifi still remains unreliable, so anyone trying to game will still also be better served with wired connections. Even if "theoretical peak bandwidth" is lower.