3 ms·
When I made one of these with a cheap box fan and a good 3M filter that covered one face completely, I ran into the airflow problem. For reasons (cheap fan wit
by neilv 6y ago
When I made one of these with a cheap box fan and a good 3M filter that covered one face completely, I ran into the airflow problem.
For reasons (cheap fan with the cable and switch going in the center of the rear), I had to have the filter on the outflow side of the fan, and I was getting much more airflow back out the corners of inflow side of the fan than through the filter.
I'm frugally-inclined, but I was desperate to clean up some nasty dust from construction work, so I ended up buying 2 Levoit air purifier appliances. They have better airflow, and are much quieter. They also exhaust upwards, which I guessed might be less likely to disrupt a whole lot of dust-at-rest at once.
A problem now is not so much that the consumable filter cartridges are expensive, which I could live with if they are motivated to be high-quality, but that counterfeits are inevitable. A related problem is that I don't have a great way to measure filter effectiveness, whether I'm buying high-quality genuine, third-party, counterfeit, or genuine facing pressure from counterfeits and seeing less value in remaining high-quality.
- EricE 6y agoJust cut down a furnace filter to fit inside. I’ve been doing that for years with a few Sharp units I can’t get filters for any more (discontinued) and some newer Levoits. If you leave them running all the time on low they are more effective than running them part of the day with the “official” filters.
- neilv 6y agoGood idea -- that would work for my larger Levoit unit, which takes a pair of flat rectangular filters, though not for the smaller cylindrical unit. For now, I'm going to try to keep buying the Levoit filters, since I think they have more "layers" than the furnace filters, and I don't have a good sense of what all I should to be filtering in this location. But it's good to have a backup plan.