7 ms·
>We're running engines for tens of hours, dozens of hours, we're not yet in the hundreds of hours where we want to be. Durability and reliability and maintena
by nabla9 6y ago
>We're running engines for tens of hours, dozens of hours, we're not yet in the hundreds of hours where we want to be.
Durability and reliability and maintenance are the issues with these type engines.
For some military applications that's not an issue. If you want to build large number of cheap lightweight drones for high intensity warfare, durability is secondary. They will be shot down eventually anyway. Operating smaller number for training purposes during peacetime is not that expensive.
- aidenn0 6y agoThe edge-seals can be externally lubricated in this engine; that will at least improve maintenance.
- bsder 6y agoYeah, that was the first thing I looked for: https://youtu.be/8vbQjlzvaO8?t=58 https://youtu.be/8vbQjlzvaO8?t=58 I presume that having those seals on the non-moving part is a big win.
- busterarm 6y agoI have a turbo'd rotary engine in a mostly-unmodified car that's at 140k miles without an engine rebuild. I've had to replace numerous things under the hood due to the heat output though (wiring harness, everything rubber) or otherwise poorly designed (the weak alternators...). If you discount design flaws in the early RX-8s wrt lubrication, turbo timing issues in the FDs, the oil metering pumps in FCs & FDs, the engines are pretty solid. Almost all of the blown engines I've seen start wth people trying to increase boost. The problem is that you can modify the car little by little and every way you do this puts stress on the engine. You have to modify the car a lot (fuel pump, injectors, engine porting, turbo wastegate modification, new exhaust, bigger alternator, ecu chipping/megasquirt, cooling upgrades) before the car can really handle the new power that it has without tearing itself apart.
- SoSoRoCoCo 6y agoHave you ever owned an RX-7? It was pretty dang solid.
- busterarm 6y agoI literally just described the fact that I own (currently) an RX-7. How many other production rotaries are there?
- p1mrx 6y agoYour previous post does not contain the number 7.
- busterarm 6y agoFCs and FD
- twic 6y agoTo be fair, you didn't say you did or had owned one - you just told us to discount design flaws in them!
- busterarm 6y agoIn the cars, not the engines. People often conflate the two. A reasonably maintained Mazda rotary engine will have a similar lifespan to similar cars of the same era with piston engines.
- kwertyoowiyop 6y agoThere was also the RX-3.
- girvo 6y agoCosmos, a Citroen, couple others. None that saw US release though, IIRC.
- tonmoy 6y agoThey are trying to replace a generator, which needs to be running a long time I would assume.
- hwillis 6y agoSwashplate engines are essentially the current go-to: they're extremely compact and have many other good properties, but wear out quickly. I believe they are significantly more compact than rotaries (and this), though.
- intrasight 6y agoGet the tech cheap enough and I could see it used in high-end consumer drones. It only has to be as durable and reliable as the drone itself.