3 ms·
Well, that ignores the charge termination rules for NiMh, so the effect on long term battery life won't be great ...
by pjc50 6y ago
Well, that ignores the charge termination rules for NiMh, so the effect on long term battery life won't be great ...
- qz2 6y agoYeah if you’re going to do this and forget such things you might as well use a diode and resistor and be done with it. It’s no worse than this circuit.
- whereistimbo 6y agohow about this: https://create.arduino.cc/projecthub/aleksand1975/intelligent-charger-for-9v-nimh-rechargeable-batteries-v1-61cbd6 https://create.arduino.cc/projecthub/aleksand1975/intelligen... ?
- pjc50 6y agoThat looks a lot better, it recognizes the dv/dt condition and has a number of safety features.
- dragontamer 6y agoTrickle charge (less than 15mA) for NiMH was fine for long-term battery life I thought? EDIT: https://data.energizer.com/pdfs/nickelmetalhydride_appman.pdf https://data.energizer.com/pdfs/nickelmetalhydride_appman.pd... >> Finally a maintenance (or trickle) charge rate of less than 0.025 C (C/40) is recommended. The use of very small trickle charges is preferred to reduce the negative effects of overcharging. C/40 constant trickle-charge is good for NiMH chemistry. ----------- The simplicity of trickle-charge is one of the defining reasons to use NiMH over other chemistries. 15mA * 40 == 600mA-hrs, which should be safe for even tiny AAA-NiMH cells. EDIT: Ah, I assumed the article was going for the Trickle Charge technique. Hmmm... it uses a 555-timer for "current limitations" which seems... harder than just using an OpAmp + transistor.