10 ms·
First commercial curved CMOS sensor from startup CURVE
- londons_explore 6y agoMaking CMOS sensors from scratch is very much not a thing for a thrifty startup to achieve... Yet submitting a design to a commercial fab and saying "make it curved plz" isn't likely to work either. So how is this done?
- wmf 6y agoIf you thin a silicon die enough it becomes flexible. I suspect they're using a standard planar fab then thinning the die and mounting it on some curved substrate.
- nickff 6y agoThey may even just be using relief cuts in the die to produce the effect. Reliefs have a number of advantages, including reducing twisting and buckling.
- londons_explore 6y agoBut not flexible in 3 dimensions... (Ie. You can curve it around a cylinder, but not around a sphere)
- sudosysgen 6y agoWouldn't different thicknesses allow this?
- vel0city 6y agoTake a sheet of paper and wrap it around a ball. Notice how it folds? If you could take a flat surface and have it represent the surface of a sphere without warping (or vice-versa), we wouldn't have constant debates about what kind of map projections are best.
- sudosysgen 6y agoYes, I agree. What I mean is that by varying the thickness, you can get it very close to or exactly a sphere.
- deleted 6y ago[deleted]
- plasticchris 6y agoMaybe you could make it like an orange peel and bend it mostly sideways? Depends on how rigid it is. Or cut ridges like a fresnel lens? Or like lasik? All depends on the material properties.
- grovellogic 6y agoIf you want to dive deeper into the issues look into Developable Surfaces https://en.wikipedia.org/wiki/Developable_surface https://en.wikipedia.org/wiki/Developable_surface
- ChuckMcM 6y agoGood question. I don't know but I know from another effort that was at Sun way back in the day it is really difficult to create curvature in a system that wants flat optical masks and flat processing. There are at least two challenges, one is curve itself, and the other is laying out the sensor to be linear across the curved surface. I'm wondering if they are going to do a Hot Chips presentation, that has been where most of the coolest advances in chip making have been detailed. A friend speculated they might be doing a mems sort of thing where they make a 'thick' chip and then etch down to the layers of sensors, perhaps polishing, as a glass lens might be made, but for me that seems like it would be too risky. Thinning and bending is a possibility of course you need to account for the final topology in your layout. Definitely a fun puzzle to speculate about.
- m463 6y agoAlthough wafers seem easy to make flat, I wonder if lithography itself might work better on a curved target.
- bhouston 6y agothere are lenses in the lens assembly that flattens the image. Thus if you wanted to make curved wafers you could remove these. But then the curve would be across the water itself and maybe not what you want on the individual chip level.
- supernova87a 6y agoInteresting! Do they start with a curved piece of silicon and do the fabbing on that? Or is it initially flat and then bent during the process? Will this be generally isolated to very specialty wide-field imaging? And expensive, custom runs?
- BostonEnginerd 6y agoI would expect the sensors are manufactured flat, back thinned down to where Si is flexible and then mounted onto a curved support structure. It looks like their US patent is here: https://patentimages.storage.googleapis.com/10/b3/ee/69d396b97984e7/US10109670.pdf https://patentimages.storage.googleapis.com/10/b3/ee/69d396b...
- supernova87a 6y agoHow interesting! By the way, this brings back thoughts how astronomy used to be done with thin glass plates, doing wide area sky surveys. The plates would be placed into the plate holder, and some pressure was necessary to deform the plate to match the curvature desired. They said you knew when you'd gone to far because you'd hear the tinkle of broken glass... (they also baked the plates in hydrogen to increase their light sensitivity)
- BostonEnginerd 6y agoEverything old is new again! We may be back to vacuum tubes again soon: https://spectrum.ieee.org/semiconductors/devices/introducing-the-vacuum-transistor-a-device-made-of-nothing https://spectrum.ieee.org/semiconductors/devices/introducing...
- Vrondi 6y agoThis is from a reply they made to a comment on the article: "Hi, you are right, we take available sensors and just change their shape before packaging. It makes it a plug-and play product, with no need to have a specific PCB development."
- jbay808 6y agoIs this in any way related to this earlier HN submission about Sony's patent on curved sensors? https://news.ycombinator.com/item?id=25113755 https://news.ycombinator.com/item?id=25113755
- giuliomagnifico 6y agoI don't think, Sony made a patent, this startup the final camera CMOS.
- Darthy 6y agoThat’s not the first - Sony already released a product with a curved sensor in 2014, the KW1: https://www.sonyalpharumors.com/sony-confirms-kw1-perfume-selfie-camera-has-curved-sensor/ https://www.sonyalpharumors.com/sony-confirms-kw1-perfume-se...
- giuliomagnifico 6y agoRight but the Sony one is a small 1/2.3-inch, this one looks like a Full Frame 35mm sensors. Edit: I think "the first one" is the claim for "very first commercial curved sensor for a scientific application"..."for a scientific application" they said, Sony was a selfie camera :-)
- bombela 6y agoSo (1/(2.3)) inch == 11mm vs 35mm for the new one?
- Exmoor 6y ago~6.17mm vs 35mm width or 7.66mm vs 43mm for diagonal, which is probably a better measure since the aspect ratio is different. Source: https://en.wikipedia.org/wiki/Image_sensor_format#Table_of_sensor_formats_and_sizes https://en.wikipedia.org/wiki/Image_sensor_format#Table_of_s...
- mark-r 6y agoSensor size designations are very confusing. The 1/2.3 is based on the diameter of an old tube sensor, of which a large portion couldn't be used for imaging. The 35mm is based on 35mm film, which was actually 24mm x 36mm. The only way to make sense of it is to use a table showing actual dimensions, such as https://en.wikipedia.org/wiki/Image_sensor_format#Table_of_sensor_formats_and_sizes https://en.wikipedia.org/wiki/Image_sensor_format#Table_of_s....
- arthurcolle 6y agoSorry, I’m a pleb but in what capacity/setting is this particularly useful? EDIT: I don’t mean this in a negative manner, I just don’t know about this kind of stuff so I’m curious about what settings this is useful.
- Judgmentality 6y agohttps://en.wikipedia.org/wiki/Petzval_field_curvature https://en.wikipedia.org/wiki/Petzval_field_curvature A curved sensor should improve optics by limiting distortion. So basically it can take better pictures.
- arthurcolle 6y agoThanks, appreciate it. Kind of like an eyeball?
- arthurcolle 6y agothe other guy deleted his reply :( I liked the added information
- sudosysgen 6y agoPretty much, yes. Sometimes it will have the opposite curvature.
- deleted 6y ago[deleted]
- signaru 6y agoAs someone who have designed lenses (with Zemax et al), this means I can get by with fewer lens elements, making it less expensive. That's one aberration type I can stop worrying about.
- ohazi 6y agoOne interesting challenge I assume they faced here is that the properties of Silicon that are relevant for transistors can be (significantly?) affected by stress/strain. So while it seems reasonable that you could thin down a digital circuit and have it continue to function correctly when bent, a CMOS sensor is a very analog device. I wonder if noise / dark current / other properties vary depending on where the stresses are applied.
- supernova87a 6y agoOh, this is even more interesting after looking into it (see this diagram from another site): https://www.dpreview.com/news/7542036825/french-startup-is-preparing-its-curved-cmos-image-sensor-for-mass-production https://www.dpreview.com/news/7542036825/french-startup-is-p... The curvature goes in the opposite direction of what I would have thought. I would've thought the orientation of the curve was in the sense of maintaining a "constant radius" from the end of the lens stack. (exit pupil?) I.e. the curve helps bring in the distant parts of the sensor closer and more orthogonal to the light rays. But the diagram shows the opposite kind of curve! That makes even less intuitive sense to me. (I can't imagine someone not involved with the company creating this diagram, or it being so wrong and not being caught by some review process? I figure the diagram is legit? Someone drawing ray tracing level details would get it so wrong?)
- bgee 6y agoThe illustration also contradicts the real picture of the sensor. Also from the same DPReview article: "Curved image sensors mimic the human eye", that illustration is not how I thought the retina is shaped.
- m463 6y agoThe image of the sensor held by the fingers looks concave. The illustration with simplified optics shows a convex sensor. Hard to figure it out. I would imagine chromatic abberation and light dropoff is due to flat sensors and concave sensors would help. But I might not understand modern lens design.
- sudosysgen 6y agoIt depends on the lens. Some lenses will more easily want a sensor that curves away, others will prefer a sensor that curves towards them.
- bgee 6y agoHow would this sensor works with the microlens [0] that help direct the lights onto each pixel and already exist in most modern camera CMOS? [0]: https://en.wikipedia.org/wiki/Microlens https://en.wikipedia.org/wiki/Microlens