4 ms·
Whatever you do, don't buy an icestick. They're not cost efficient. Check aliexpress for iCESugar. That's an iCE40 UP5K development board that's half the price
by snvzz 6y ago
Whatever you do, don't buy an icestick. They're not cost efficient.
Check aliexpress for iCESugar. That's an iCE40 UP5K development board that's half the price (~$30) as the icestick and much more powerful.
It also works fine with the open stack.
Full disclosure: I own iCEStick, iCESugar, BlackICE MX and TinyFPGA-BX.
- homarp 6y agogit: https://github.com/wuxx/icesugar https://github.com/wuxx/icesugar icesugar maker: https://twitter.com/JohnnyW11773607 https://twitter.com/JohnnyW11773607 he has his own shop on aliexpress
- snvzz 6y ago>he has his own shop on aliexpress https://muselab-tech.aliexpress.com/store/5940159 https://muselab-tech.aliexpress.com/store/5940159 Sells a few interesting tools besides iCESugar. The nanoDLA's a cheap OSHW 24MHz logic analyzer that works with pulseview (sigrok) and is sure to be invaluable when trying to debug design issues with the FPGA.
- ruslan 6y agoOlimex iCE40HX8K-EVB is $50, it comes with 512KB SRAM chip, two buttons, two LEDs and lots of IO wired to five block connectors.
- snvzz 6y agoThanks for the tip. I'd get one if I didn't already have too many iCE40s.
- jstanley 6y agoI have dabbled with Arduinos but have never used an FPGA. Can you say whether this tutorial would still work on something that is not an IceStick? The claimed $40 is not expensive enough to put me off, and if it means I have a tutorial to learn from instead of trying to wing it on my own, it's probably worth the extra.
- snvzz 6y ago>I have dabbled with Arduinos STM32 are worth looking into, with "blackpill" boards at around $2 on aliexpress. Investigate stm32-base.org if you're curious. >Can you say whether this tutorial would still work on something that is not an IceStick? Yes, absolutely. Compatibility across the board is excellent for the whole iCE40 family, at least while using the open flow (icestorm, yosys and nextpnr). I've never tested the proprietary vendor tools. For the suggested iCESugar, You'll have to map the pins (edit the pcf constraint files to match those in the iCESugar board), but this is a basic operation you'll have to do for any design outside of a tutorial. You'll also have to tell nextpnr-ice40 to route for LP5K instead of HX1K. As the external clock source in ICESugar is 12MHz like iCEStick, you won't even have to do any adjusting of parameters involving clocks. I'd suggest using PMOD 2/3 as they don't share any pins with the onboard functionality. PMOD 1 can be freed by removing the jumpers connecting the serial port, and by not using the FPGA-dedicated USB port. Overall, the iCESugar has a lot of I/O, whereas it is easy to run out of usable pins on the iCEStick. There's some differences between the FPGA chips, but the tooling is the same. Relative to the HX1K, among other niceties, the LP5K is way newer (newest subfamily), has two internal oscillators, has way more (5K vs 1K) logic blocks, so they can fit a lot more logic, some hard blocks for basic peripherals (which are out of the way unless wired by your design) and more sysMEM blocks. This has proven to be extremely useful in my projects. The only aspect in which the LP5K is disadvantaged is in slower propagation speed (HX is the "high performance, power doesn't matter" subfamily), so the max clocks for a given design will be lower. Say, 120MHz vs 90MHz on the same design (not as dramatic as this). This will typically not matter in most tutorials out there, which seldom use the PLLs at all, thus the clock is always the non-scaled 12MHz source.
- bb88 6y agoThere are several dev fpga boards. I recommend the ICEBreaker board for a first go.
- UncleOxidant 6y agoI've got a BlackICE II from a couple of years ago. Any reason to upgrade? I was thinking of ULX3S ECP5 board but it seems a bit pricey. https://www.crowdsupply.com/radiona/ulx3s https://www.crowdsupply.com/radiona/ulx3s
- snvzz 6y agoNothing major that I am aware of in II vs Mx. I'd argue the old board is better thanks to SRAM. I did order ulx3s but several months later I am still waiting, no news.