3 ms·
I agree with the parent. F-Stop is the ratio of the Focal length to aperture diameter. Increasing that ratio, increase the depth of field. Decreasing that ra
by ghshephard 16y ago
I agree with the parent. F-Stop is the ratio of the Focal length to aperture diameter. Increasing that ratio, increase the depth of field. Decreasing that ratio, decrease the depth of field.
Instinctively, F23 will put everything in focus (which is why we use it to identify dust spots on our CCDs, whereas F1.4 on anything reasonably close is going to have a DOF measured in inches.
Can you come up with a counter example where DOF doesn't change in this direction?
Apologies if I'm missing your entire point - I've been starting at it for five minutes, not sure if you are going a different direction.
- hackermom 16y ago"Can you come up with a counter example where DOF doesn't change in this direction?" I gave three examples above. I can elaborate: DoF changes depending on how you strangle the light by contracting the diaphragm the lights passes through (thus preventing light from dispersing), not from having a higher ƒ value. A really dark lens is a good example of this. Some can have a light throughput that begins at ƒ/6.3, or even ƒ/8.0, yet at wide-open aperture they produce as narrow DoF as f.e. my Nikkor 50mm ƒ/1.4 does, which is 5 exposure steps brighter - or, as you reason, 5 aperture steps more open. Why? Because their apertures are wide-open in both cases.
- lutorm 16y agoSorry, but you are wrong about this. Look at http://en.wikipedia.org/wiki/F-number http://en.wikipedia.org/wiki/F-number You seem to be thinking of something similar to what the Wikipedia article calls "T-stops", a calibration of the absolute transmission of different lenses. That's something different from the f/ratio.
- hackermom 16y agoAre you nitpicking? You can point to aperture stop theory and the history of the f-numbers etc. indefinitely, but ƒ is and will remain synonymous with light transmission (or "T" as you keenly insist; thank you, I am familiar with it) in every single practical situation of photography, no matter how much you try to balance the needle on its tip.
- ghshephard 16y agohackermom, I mean this with earnest sincerity - so please take it in that nature; In fifteen years of photography, photography classes, photography magazines, and photography books - I have never, ever, had anyone suggest that ƒ is synonymous with light transmission. It is possible, that I, and every photographer, photography magazine, photography book, photography instructor, technical reference, manufacturer, and Wiki-Page, has been using the term incorrectly all this time - but could you stop for a second and possibly consider that perhaps you might be the one using it somewhat differently than everyone else? At the very least - look at a camera, and note that when you set the "F-Stop" to, or read it to be, say, F/3.5, it does precisely the same thing to the camera if you are in a completely pitch-dark room or outside on a very sunny day. That alone should suggest that F-Stop is not a measure of light, but instead of something else, and, perhaps also consider that it is, as I have suggested numerous times on this thread, the ratio of the focal length to aperture diameter.
- ghshephard 16y agoYou can't adjust your F-Stop with dark lenses. F-Stop is not a measure of light coming in, it's a measure of the focal length to the aperture. Light conditions prior to hitting the aperture (Either by flashes, sunlight, or dark lens) are entirely separate from the concept of F-Stop. For a given focal length on a subject in focus at a reasonable distance (not at infinity), increasing the F-Stop will always increase the DOF.