3 ms·
How are you bypassing the EAP authentication on your AT&T provided gateway? Are you using https://github.com/jaysoffian/eap_proxy https://github.com/jaysoffian/
by AaronFriel 6y ago
How are you bypassing the EAP authentication on your AT&T provided gateway? Are you using https://github.com/jaysoffian/eap_proxy https://github.com/jaysoffian/eap_proxy ?
My router is also getting a public IP address, I've set my AT&T gateway to bridge mode, but the AT&T gateway is still a monster-in-the-middle, a tumor I can't excise because it has to be between your router and the ONT or else the fiber turns off.
- bakul 6y agoI recall hardly any of the details now but IIRC I talked to the AT&T support person and they changed some settings. Looking at the settings now, I see in "Home Networks->Subnets & DHCP" the [public subnet mode] is on. I haven't had to deal with any EAP authentication (but again I may be forgetting!). And IP Passthrough is off. Basically the modem is routing between the public and private subnets. BTW, I do have a static IP block from AT&T.
- toast0 6y agoWhen I was in the service area, I had written a EAP proxy and did it that way (I've still got the code around somewhere, ran on FreeBSD, email in my profile if you want it), but I've heard the easier way is to put an unmanaged switch between the ONT and the residential gateway, let the gateway do the 802.11x, then unplug it from the switch and use hardware of your choice. As long as your switch isn't too smart, it won't know to send an 802.11x signoff, and the ONT will leave the network port working. Yay, security theater. You may need to spoof mac for DHCP, but I don't know if that's strictly required.