4 ms·
No, they would have invented something faster that wasn't a Mac. Perhaps an evolution of the //GS.
by wmf 6y ago
No, they would have invented something faster that wasn't a Mac. Perhaps an evolution of the //GS.
- duskwuff 6y agoThe IIgs came out in 1988, four years after the Macintosh. As such, GS/OS was pretty heavily influenced by the Mac user interface; it was practically a demake. It still had some unique quirks, though -- for instance, it used proportional scrollbars, which wouldn't show up on the Macintosh until 1997 (in Mac OS 8).
- rbanffy 6y agoNot only 4 years after, but it had a slower 65816 to make sure it wasn't faster than a Mac.
- justanother 6y agoBegging pardon, 1986, two years after the Mac. It also beat the Mac to market with a color GUI and ADB keyboards and mice. But yup, hardware-wise it was kneecapped from the start (1MHz IO bus, 65816 cpu would never rival m68k, low cpu clock speed) entirely for marketing reasons.
- rbanffy 6y agoDidn't it only slow down for slot-based IO? Or did it slow down to 1MHz for the built-in IO devices too?
- justanother 6y agoYup, the built-in graphics RAM was 1MHz as well; It couldn't redraw its entire screen inside a single refresh (although by remapping the 65816 stack to screen RAM, it got close enough to do most of it). The integrated disk controller (IWM) also ran at 1MHz.
- rbanffy 6y agoSuch a shame. Video RAM could be mapped to dual-port memory and run at any speed on both sides. :-( I really don't like the IIgs's design.
- wmf 6y agoYes, if the Mac never existed then the //GS and GS/OS would have looked quite different but they still would have existed in some form. With no Mac upgrade path, it's likely that all the different Apple II form factors would have been upgraded with the 65816 to give the platform more life. Then a next generation "Apple IV" system might have combined a 68K and 65816 to offer 32-bit performance and Apple II backwards compatibility like the PS2 having a PS1 built in. (Apologies rbanffy, I wrote this before seeing that you posted almost the same idea earlier.)
- spongeb00b 6y agoWe know that Apple was investigating the successor to the 65816 as used in the then current //GS https://mirrors.apple2.org.za/apple2.caltech.edu/miscinfo/65xxx.chronology https://mirrors.apple2.org.za/apple2.caltech.edu/miscinfo/65...
- rbanffy 6y agoI often wonder what a 65832 (or 65864) would look like. For instance, I'd add instructions treating all registers as floating point (fp32 and fp64). And have full 32/64 bits data buses.
- duskwuff 6y agoWonder no more! Here's a preliminary datasheet. http://archive.6502.org/datasheets/wdc_w65c832_preliminary_mar_1991.pdf http://archive.6502.org/datasheets/wdc_w65c832_preliminary_m... The part was never produced, in large part because Apple wasn't interested in continuing the IIgs line.
- ksherlock 6y agoIn this case, it's better to imagine what could have than to see what it would have been. That's basically the 65816 documentation but 16 is find/replaced with 32. Some of time. A, X, and Y are 32-bit but the data bus is still 8-bit, address space is still 24-bit, stack, direct page, and program counter are still 16-bit.
- rbanffy 6y agoOne of the first things I'd throw out is binary compatibility. Making it source-compatible at the assembly level would be enough and would free a lot of possibilities that being attached to old code wouldn't.