4 ms·
People had a lot of success buying cheap amps from AliExpress based on a known chipset, like the TPA3250 mentioned in the article, and change the few components
by GuB-42 6y ago
People had a lot of success buying cheap amps from AliExpress based on a known chipset, like the TPA3250 mentioned in the article, and change the few components that matter.
Usually, it is about changing the cheap knockoff caps by proper audio-grade ones.
Now you are left with the 90% of the work, that is getting a good power supply ;) The easy way is battery power, but then you need to charge the batteries. Linear power supplies are big, expensive and inefficient, but relatively easy to get right.
Switching power supplies are tricky as they tend to introduce all sorts of noise, in fact, they work almost in the same way as the amplifier itself, so you are basically powering an amplifier with an amplifier, both with their own feedback loops.
- woofie11 6y agoCounterargument: The power supply is overrated. You want to start with high-power but lousy switching power supply. You want to position it far and shielded from your amplifier. You want a decent ferrite bead on the cable, and a decent bypass filter in the box (both electrolytic and ceramic). The high-frequency stuff should mostly be gone. You can then use a linear regulator and a pretty basic filter to clean up the rest, and introduce an extra volt-or-so of drop on the output. It sounds like a lot, but it's not.
- widea 6y agoYes, I built a few headphone amplifiers using a similar setup: switching power supply - EMI filter - rail splitter - amplifier. No noise, just wonderful sound.
- captn3m0 6y agoCould you pair a okay-ish power supply with a Jitterbug perhaps? https://www.headfonia.com/review-audioquest-jitterbug-usb-magic/ https://www.headfonia.com/review-audioquest-jitterbug-usb-ma...