6 ms·
You would also want a dongle that has a driver already bundled with the OS. Not sure if that's typical or not. Probably unlikely that the dongle itself comes wi
by tyingq 6y ago
You would also want a dongle that has a driver already bundled with the OS. Not sure if that's typical or not. Probably unlikely that the dongle itself comes with a suitable ARM/Linux driver.
- kristopolous 6y agoI'll say you're fine again having done this a few times already. It's always just worked
- gruturo 6y agoI add my voice to the chorus of complaints about dongles, but for the record you could also use an inline HDMI audio extractor which is invisible to the OS and requires no drivers for sure. They are also very cheap.
- iso947 6y agoHardware in linux tends to just work
- m-p-3 6y agoThanks to all the contributors out there <3
- lxgr 6y agoUSB audio devices are standardized (just like flash drives, as USB mass storage, and keyboard/mouse, as HID respectively), so you don't need device-specific drivers for most of them.
- gambiting 6y agoYes, but this isn't a USB audio device. You need to be able to select and control an HDMI audio output for this to work.
- lxgr 6y agoWhat "this" are you referring to? The grandparent post is talking about USB dongles as a workaround, which in my experience work very reliably.
- gambiting 6y agoOh. Either that post was edited or I misunderstood - I thought they were talking about an HDMI dongle with 3.5mm audio jack for audio extracted from the hdmi. But yes, indeed, a USB audio dongle should "just work".
- morsch 6y agoI don't think HDMI audio extractors need a driver, either. The first one I could find claims compatibility with all kinds of source devices. It's probably entirely invisible to the source. I don't how know about HDMI DRM, but that's not a problem for the RPi.
- gambiting 6y agoThey don't, but they can be finicky. Most can only extract audio if it's specifically sent as stereo, if the source sends audio as encoded 5.1 stream then most don't know how to decode that. So you will need support for being able to chose the output format over hdmi, which is where I imagine the difficulty in the RPi will start.
- lxgr 6y agoThat makes a lot of sense, I guess it's either that or the adapter would have to somehow modify the EDID display capabilities to get the HDMI source to output PCM audio (or whatever the splitter accepts) only. I wonder if it doesn't already need to do that for non-audio-capable HDMI sinks. (My first HDMI monitor didn't have speakers or even a headphone jack, and as far as I recall, the source computer could tell this somehow and wouldn't offer to send sound to the monitor.)
- 6y ago