6 ms·
"The 400 doesn’t have an audio-out." That does seem like a miss for an otherwise decent platform. HDMI out support is fine, but since this setup is quite port
by tyingq 6y ago
"The 400 doesn’t have an audio-out."
That does seem like a miss for an otherwise decent platform. HDMI out support is fine, but since this setup is quite portable, exposing a headphone jack seems obvious. I suppose bluetooth is the expectation now?
- fludlight 6y agoMany (most?) HDMI monitors have an audio-out jack.
- ansible 6y agoUnfortunately, most new TVs don't have a 3.5mm audio jack these days.
- tonyedgecombe 6y agoBut they do have speakers.
- martinpeck 6y agoI agree. A headphone jack would make so much sense.
- kristopolous 6y agoUSB audio dongles are super cheap. You can get 2 of them for about $10. If I was on the design team for it I could eventually come around to being fine with it.
- gambiting 6y agoYes, but it's "yet another" dongle for this machine which is meant to be an easy to use all-in-one friendly to beginners. Them using micro HDMI is already bizarre seeing as there's loads of room for a full size port and most people will need a dongle/adapter here, but not including an audio jack is crazy, seeing as the proper Rpi4 does have one!
- ranit 6y ago> and most people will need a dongle/adapter Micro HDMI to HDMI cable is included in the kit.
- tyingq 6y agoYou would also want a dongle that has a driver already bundled with the OS. Not sure if that's typical or not. Probably unlikely that the dongle itself comes with a suitable ARM/Linux driver.
- kristopolous 6y agoI'll say you're fine again having done this a few times already. It's always just worked
- gruturo 6y agoI add my voice to the chorus of complaints about dongles, but for the record you could also use an inline HDMI audio extractor which is invisible to the OS and requires no drivers for sure. They are also very cheap.
- iso947 6y agoHardware in linux tends to just work
- m-p-3 6y agoThanks to all the contributors out there <3
- lxgr 6y agoUSB audio devices are standardized (just like flash drives, as USB mass storage, and keyboard/mouse, as HID respectively), so you don't need device-specific drivers for most of them.
- gambiting 6y agoYes, but this isn't a USB audio device. You need to be able to select and control an HDMI audio output for this to work.
- stock_toaster 6y agoI think it has bluetooth too, so that could be another possibility.
- bloopernova 6y agoUSB audio would also be an option, but I agree, a lack of audio out for headphones or a headset seems like an error of judgement.
- tbronchain 6y agoConsidering most phones already ditch the audio jack, I'd say it's not so surprising? I'm a bit more disappointed there is no usable usb c - and we could use these usb c-3.5 adaptors almost everyone has now.
- butz 6y agoThat's a bummer. I was planning to connect CRT TV to it through composite, that was passed through headphone jack.
- cesarb 6y agoI personally suspect that removing composite output was the real reason for removing the headphone jack. From what I've read, to enable composite output on the Raspberry Pi 4 you have to enable a special setting on config.txt, which when enabled slows down some of the clocks so that it can produce the correct frequencies for the composite output to work. Not having composite output removes the need for that wart.
- vaccinator 6y agoA portable computer like this is probably more likely to be plugged in a TV, like at hotels.
- tyingq 6y agoNot everyone likes their hotel porn going through the speakers :)
- vaccinator 6y agoThats why they invented the mute button :)
- davidhyde 6y agoThe on-board sound quality on the raspberry pi line has traditionally been quite poor so you probably want a dedicated sound dongle anyway especially if you are using headphones. This is an article about the model b+. It's an older version than the 4 but explains the problem just as well since the 4 still uses PWM instead of a DAC. http://www.crazy-audio.com/2014/07/sound-quality-of-the-raspberry-pi-b/ http://www.crazy-audio.com/2014/07/sound-quality-of-the-rasp...
- philistine 6y agoYou’re giving me flashback to the whole Game Boy line, who always had a buzz in the headphone jack until the DS finally properly isolated the sound.
- rootsudo 6y agoAnd why some ipods still are $$$ because of DAC.
- kingosticks 6y agoThe hardware hasn't changed much but the software has tremendously and stuff from 2014 isn't relevant. Do you think the current implementation (sometimes known as audio_pwm_mode=2 but it is the default firmware these days) is still poor? I've found it's fine for everyday use and listening to music. I think a line-out would have been fine for people to use.
- beagle3 6y agoApple, Samsung and others have eliminated the audio jack (for different reasons) and there was a lot of outrage but the bottom line is: acceptable Bluetooth headphones can be bought for about $10-$25 now, and are widely available. Between Bluetooth headphones, HDMI out to the screen, HDMI audio splitters and $5 USB audio dongles, it really is a fine design choice - especially given that the RasPI’s analog audio out circuitry is low quality to begin with.
- jacquesm 6y agoBluetooth introduces (even more...) latency, which isn't always acceptable.
- beagle3 6y agoThis is not a gamer machine at $70. Yes, Bluetooth introduces a tiny bit of audio latency, which is perfectly acceptable for 98% of all use, and 99.9% of RasPI 400 uses. For the rest of the cases, use one of the other RasPI400 options, a RasPi 4 or a Razer laptop.
- pta2002 6y agoIn my experience, bluetooth audio latency has made watching videos completely impossible, extremely annoying to be hearing something and not seeing the lips of the person moving the right way.
- Adverblessly 6y agoIIRC both VLC Player and mpv allow you to set a keyboard shortcut for increasing/decreasing audio-video delay and are capable of streaming directly from YouTube (and I believe any website supported by youtube-dl). I use mpv and whenever I get audio latency from my headphones* I just adjust in the player. * - It seems like there's some adaptive algorithm where they start off at 0ms latency but if they experience one hiccup they increase to 250ms-300ms and then another hiccup causes them to jump to 500ms. This is also why a keyboard shortcut that let's you adjust the exact a-v delay value is useful beyond just setting the value once.
- jdietrich 6y agoI just don't think a headphone jack justifies the BOM cost, given that most HDMI displays have a headphone output and Bluetooth headphones and speakers are commonplace.
- beervirus 6y agoWhat does it add, 15 cents?