3 ms·

If you have multiple colors per layer, you have to switch filaments at each layer. A typical 3D print has hundreds of layers. Manually switching is only an alte

If you have multiple colors per layer, you have to switch filaments at each layer. A typical 3D print has hundreds of layers. Manually switching is only an alternative if you print a continuous part in one color, and then switch to another continuous part in a uniform different color. In this method you have to only switch to each color once (if the filament length you can print is enough for your object).

mrfusion 6y ago
Hmm. I’m not getting the switch each color once part. Why is that?
- fabian2k 6y ago
  Printing the filament like in the linked article is essentially in 2D (not really, but for this point it's close enough). So if you have 2 colors, you can first print all color 1 segments, and then manually switch and print all color 2 segments. In a real object your print is 3D and consists of layers that are ~ 0.1-0.2mm high. In a typical multicolor print each layer has several colors, and you have to finish a layer before printing the next one. So you have to switch between all colors that are present in each layer.
- fentonc 6y ago
  To create the 'programmable filament,' you only switch over to each color once as they generate the toolpath in such a way that the nozzle doesn't interfere with previously printed filament (and the printer resets the z-axis back to 'layer 0' each time it switches colors). For making relatively small, multi-material / multi-color prints, this really is a pretty clever system that looks reasonably practical on a wide variety of existing low-end 3D printers. With good software support, I could imagine being able to make things with interesting physical properties by making hybrid rigid / flexible materials (integrated hinges or other deformable parts, for instance).
  - mrfusion 6y ago
    I finally get it! That’s really cool. This is what I wasn’t getting: > resets the z-axis back to 'layer 0' each time it switches colors

mrfusion 6y ago

Hmm. I’m not getting the switch each color once part. Why is that?

fabian2k 6y ago
Printing the filament like in the linked article is essentially in 2D (not really, but for this point it's close enough). So if you have 2 colors, you can first print all color 1 segments, and then manually switch and print all color 2 segments. In a real object your print is 3D and consists of layers that are ~ 0.1-0.2mm high. In a typical multicolor print each layer has several colors, and you have to finish a layer before printing the next one. So you have to switch between all colors that are present in each layer.
fentonc 6y ago
To create the 'programmable filament,' you only switch over to each color once as they generate the toolpath in such a way that the nozzle doesn't interfere with previously printed filament (and the printer resets the z-axis back to 'layer 0' each time it switches colors). For making relatively small, multi-material / multi-color prints, this really is a pretty clever system that looks reasonably practical on a wide variety of existing low-end 3D printers. With good software support, I could imagine being able to make things with interesting physical properties by making hybrid rigid / flexible materials (integrated hinges or other deformable parts, for instance).
- mrfusion 6y ago
  I finally get it! That’s really cool. This is what I wasn’t getting: > resets the z-axis back to 'layer 0' each time it switches colors