4 ms·

Interesting, when I studied these a long time ago they talked about mining geothermal energy in these kinds of deep rocks but having to move the "heat mine" aft

Interesting, when I studied these a long time ago they talked about mining geothermal energy in these kinds of deep rocks but having to move the "heat mine" after it got cool due to the lack of heat transfer through the solid rock. I got the impression that heat flows into the hot rock are orders of magnitude lower than the heat flows out required to make power generation efficient and useful. The radiator design is interesting but ultimately it's a heat sink and power output will be limited. Initially I bet the power output is great, and as the area cools they tap it out. Who knows how long it'd last, you'd think the higher the power capacity the faster it would cool down underneath. So really you need to be able to build new mines cheap enough to justify doing such a hard mine knowing it'll only last for 22 years.

Gibbon1 6y ago
I don't have a good feel for the geology of hot spots. But remember seeing a paper on hot springs. Typically you have a situation when water seeps down a deep fault and then comes back up. Would seem you are correct. Heat transfer via conduction will be really slow. Also know that the geothermal plants in The Geysers Geothermal plants in Sonoma County have lower output then they did decades ago because the rocks have cooled somewhat.
- neltnerb 6y ago
  Thermal conductivity is one of the parameters that varies by more orders of magnitude than most properties in everyday materials. Aerogels 0.024 W/m·K Aluminum 240 W/m·K https://en.wikipedia.org/wiki/Caprock https://en.wikipedia.org/wiki/Caprock says that sandstone is a common type of rock there, and has a thermal conductivity of 2.4 W/m·K So I guess on a log scale it's half way between! So I guess imagine it's drawing heat from a source that is 100x smaller cross section and made of aluminum. Not that that is particularly helpful...
  - Gibbon1 6y ago
    Conduction is sort of dismal. Materials tend to conduct either too well when you don't want them to. And too little when you want them to. If you want to move heat from point a to b usually you want to use a fluid. That why I tend to assume for geo thermal plants you want to drill into rock where there is a lot of hydrothermal action going on. Something absolutely weird is Japan has basically zero installed geothermal power.
    - neltnerb 6y ago
      Yes, I agree, I was surprised they bothered to mention trying to seriously mine heat from hard rock, it seems like running fluid through a bore horizontally barely solves the conductivity issue since heat still has to get to the walls of the bore. I'm not sure if you are unaware but: "In 2007, Japan had 535.2 MW of installed electric generating capacity, about 5% of the world total." https://en.wikipedia.org/wiki/Geothermal_power_in_Japan https://en.wikipedia.org/wiki/Geothermal_power_in_Japan Which sure, is the total equivalent of like two nuclear cores so small by any absolute measure, but they seem to be trying?
      - Gibbon1 6y ago
        Consider Northern California has about 900MW of geothermal installed and the state isn't really known for geothermal activity. Japan which is known for that, what are they doing?
        neltnerb 6y ago
        To give California some credit, it is slightly physically larger than Japan, has far more open space without people despite the bay area (my first thought was "would they really be willing to wreck the onsens and such that have been there for a thousand years?"), is on active tectonic plates, and has been pretty focused on this for a while.
        fomine3 6y ago
        Against by local onsen owner is a main blocker. It's hoped and some develop is ongoing, but we also like onsen.

Gibbon1 6y ago

I don't have a good feel for the geology of hot spots. But remember seeing a paper on hot springs. Typically you have a situation when water seeps down a deep fault and then comes back up. Would seem you are correct. Heat transfer via conduction will be really slow. Also know that the geothermal plants in The Geysers Geothermal plants in Sonoma County have lower output then they did decades ago because the rocks have cooled somewhat.

neltnerb 6y ago
Thermal conductivity is one of the parameters that varies by more orders of magnitude than most properties in everyday materials. Aerogels 0.024 W/m·K Aluminum 240 W/m·K https://en.wikipedia.org/wiki/Caprock https://en.wikipedia.org/wiki/Caprock says that sandstone is a common type of rock there, and has a thermal conductivity of 2.4 W/m·K So I guess on a log scale it's half way between! So I guess imagine it's drawing heat from a source that is 100x smaller cross section and made of aluminum. Not that that is particularly helpful...
- Gibbon1 6y ago
  Conduction is sort of dismal. Materials tend to conduct either too well when you don't want them to. And too little when you want them to. If you want to move heat from point a to b usually you want to use a fluid. That why I tend to assume for geo thermal plants you want to drill into rock where there is a lot of hydrothermal action going on. Something absolutely weird is Japan has basically zero installed geothermal power.
  - neltnerb 6y ago
    Yes, I agree, I was surprised they bothered to mention trying to seriously mine heat from hard rock, it seems like running fluid through a bore horizontally barely solves the conductivity issue since heat still has to get to the walls of the bore. I'm not sure if you are unaware but: "In 2007, Japan had 535.2 MW of installed electric generating capacity, about 5% of the world total." https://en.wikipedia.org/wiki/Geothermal_power_in_Japan https://en.wikipedia.org/wiki/Geothermal_power_in_Japan Which sure, is the total equivalent of like two nuclear cores so small by any absolute measure, but they seem to be trying?
    - Gibbon1 6y ago
      Consider Northern California has about 900MW of geothermal installed and the state isn't really known for geothermal activity. Japan which is known for that, what are they doing?
      - neltnerb 6y ago
        To give California some credit, it is slightly physically larger than Japan, has far more open space without people despite the bay area (my first thought was "would they really be willing to wreck the onsens and such that have been there for a thousand years?"), is on active tectonic plates, and has been pretty focused on this for a while.
      - fomine3 6y ago
        Against by local onsen owner is a main blocker. It's hoped and some develop is ongoing, but we also like onsen.