4 ms·
SMDs with leads and 0603 or larger are quite easy to solder in my experience, at least on a factory-made PCB with solder mask. I can hand assemble SMD faster th
by sokoloff 6y ago
SMDs with leads and 0603 or larger are quite easy to solder in my experience, at least on a factory-made PCB with solder mask. I can hand assemble SMD faster than thorough-hole, using a temp-controlled iron for both. (I have hot air rework station as well, but most of my SMD assembly is with a fairly inexpensive iron.)
SMD is a pain during prototyping and experimenting because they’re harder to use on breadboards (breakout boards are an additional step and possible point of failure). After the breadboarding stage, I think SMD is easier and faster.
- kps 6y ago> in my experience In your experience. I solder under a stereo microscope, but I don't go smaller than 1206.
- foldr 6y agoEveryone's different, but my experience tallies with sokoloff's. With the right technique it's no problem to solder 0603 with the naked eye. 0402 is possible but very fiddly. 0201 is really pushing it. A microscope is a useful aid, especially if you're longsighted.