3 ms·
> You can't exactly make a wifi doorbell, or wifi thermostat, or wifi lightbulb, or wifi security camera, without storing a wifi password What I am thinking of
by tzs 6y ago
> You can't exactly make a wifi doorbell, or wifi thermostat, or wifi lightbulb, or wifi security camera, without storing a wifi password
What I am thinking of doing for the outdoor weather station I will someday get around to finishing is to have it be on a separate WiFi network. To get data from it you will have to connect to that WiFi network.
Inside the house, I'll have an RPi or something like that which has WiFi and Ethernet that will use its WiFi to connect to the weather station's network and Ethernet to connect to my home LAN.
If someone steals the weather station, the only password they get is the password to the weather station network, assuming that it has one (not sure yet...may make it open so that anyone in WiFi range can connect and read the data).
Same thing for the automatic wildlife camera I'm contemplating. Probably that will go on the same WiFi network as the weather station.
- therealx 6y agoVLANs and a decent firewall/router are your friend.
- Mister_Snuggles 6y agoDepending on the capabilities of your WiFi gear, you can just run these devices off of a second wireless network which backends onto a separate VLAN. You can then use firewall rules to determine what traffic is allowed to pass between VLANs. I do this for my cameras (no traffic out from the VLAN, but allow connections in from the NVR machine) and IoT devices (traffic to the internet is allowed, only some traffic to my other networks is allowed). It works very well. I use Unifi for my networking gear, but I've done the same thing with DD-WRT on an Asus router/AP device.