2 ms·
As best I can tell, it's a mix of forces. Gyroscopic action helps keep the bike upright by slowing falls. (at 100mph on a motorcycle, you must apply significan
by sliverstorm 16y ago
As best I can tell, it's a mix of forces.
Gyroscopic action helps keep the bike upright by slowing falls. (at 100mph on a motorcycle, you must apply significant force to lean over quickly)
Rake (trail) makes it less likely the front wheel will be deflected by small bumps, and I suspect it also helps settle the bike back into neutral position. In other words, decreases the number of significant self-steering corrections that must be made.
Then, some third force does the wheel turning. I personally suspect it is tied to the way the front wheel falls to the right if you suspend the bike and lean it right.
Note: Honestly, from the diagram at 2:03 it looks like they did not eliminate gyroscopic action and trail. They merely greatly reduce gyroscopic action, reduce rake, and invert trail.
- ams6110 16y agoTo turn/lean a bike at 100MPH you have to push the handlebars opposite of the direction you want to turn. If you need to swerve right, lean right and push the handlebars left. Not knowing this is probably related to many loss of control accidents among novice riders (speculation).
- sliverstorm 16y agoOf course. My point is, the gyroscopic forces of a pair of 20lb wheels spinning at nearly 1,000rpm are not trivial. It takes a noticeable amount of force to make the bike respond quickly.