5 ms·

I have more than 20 devices connected, no problems. Using hubs though.

by FpUser 6y ago

rrreese 6y ago
Yes I also have more then 12 right now, so its a little odd.
coldtea 6y ago
Running all as USB3 though? Very few peripherals have USB3 level inputs...
- FpUser 6y ago
  Hard drives are all USB3. The rest is either.
ddlsmurf 6y ago
May I ask which 20 devices ? I'm having trouble imagining more than say 5
- yellowapple 6y ago
  I can definitely see this happening if you need to run a farm of printers (be they of the 2D or 3D variety) and Ethernet ain't an option. I don't know of any such printers that can even use USB3, though (let alone require it), but still. Indeed, a buddy of mine has at least 6 or so going at once for his 3D printing business, and we're considering a similar sort of strategy (w/ e.g. some box running Slic3r and Octoprint) so he ain't constantly running USB sticks back and forth.
  - ddlsmurf 6y ago
    That's a pretty bad idea, the usb virtual serial port used by most 3d printers, because of it's low throughput, can worsen print quality, it's is much better to just upload to the sd via octoprint. For 2d printers I haven't seen any without network connectivity in a decade, and I can't imagine anyone needs 20 2d printers that are so old or cheap they don't network.
    - yellowapple 6y ago
      > it's is much better to just upload to the sd via octoprint That's... pretty much exactly the plan, yes. The printers we're using all (to my knowledge) run some version of Marlin w/ SD support, so we'd be doing this via the M28/M29 GCode commands over that same USB interface. It ain't clear that OctoPrint supports this directly, but as long as it's able to shove the exact GCode we tell it to shove we should be able to make that happen. Since Marlin's supposed to wait until it gets an M29 command before it starts printing, it seems to me like low throughput would therefore be a non-issue (aside from, you know, the amount of time it'd take to push that data across, but that'd really only be an issue for the first time we're printing a new file).
- FpUser 6y ago
  >"I'm having trouble imagining more than say 5" That's ok. People have different needs. For me it is mostly many hard drives, exercise equipment, multiple cameras, some stuff I am testing and lots of smaller things.
- deeblering4 6y ago
  I’ve got a bunch of audio related USB kit. Audio interfaces (sound cards), midi controllers, samplers, external drives, control interfaces, synths, etc. Fills up the better part of two 8 port hubs.
rbinv 6y ago
I'm curious: what kind of devices? Seems like a lot.
- karma_fountain 6y ago
  Maybe USB 3g dongles for running a click farm?
  - FpUser 6y ago
    Are you reflecting on your own experience?
- pcdoodle 6y ago
  Cameras, Sensors, Barcode, Scales, Etc.

I have more than 20 devices connected, no problems. Using hubs though.

by FpUser 6y ago

I have more than 20 devices connected, no problems. Using hubs though.

rrreese 6y ago

Yes I also have more then 12 right now, so its a little odd.

coldtea 6y ago

Running all as USB3 though? Very few peripherals have USB3 level inputs...

FpUser 6y ago
Hard drives are all USB3. The rest is either.

ddlsmurf 6y ago

May I ask which 20 devices ? I'm having trouble imagining more than say 5

yellowapple 6y ago
I can definitely see this happening if you need to run a farm of printers (be they of the 2D or 3D variety) and Ethernet ain't an option. I don't know of any such printers that can even use USB3, though (let alone require it), but still. Indeed, a buddy of mine has at least 6 or so going at once for his 3D printing business, and we're considering a similar sort of strategy (w/ e.g. some box running Slic3r and Octoprint) so he ain't constantly running USB sticks back and forth.
- ddlsmurf 6y ago
  That's a pretty bad idea, the usb virtual serial port used by most 3d printers, because of it's low throughput, can worsen print quality, it's is much better to just upload to the sd via octoprint. For 2d printers I haven't seen any without network connectivity in a decade, and I can't imagine anyone needs 20 2d printers that are so old or cheap they don't network.
  - yellowapple 6y ago
    > it's is much better to just upload to the sd via octoprint That's... pretty much exactly the plan, yes. The printers we're using all (to my knowledge) run some version of Marlin w/ SD support, so we'd be doing this via the M28/M29 GCode commands over that same USB interface. It ain't clear that OctoPrint supports this directly, but as long as it's able to shove the exact GCode we tell it to shove we should be able to make that happen. Since Marlin's supposed to wait until it gets an M29 command before it starts printing, it seems to me like low throughput would therefore be a non-issue (aside from, you know, the amount of time it'd take to push that data across, but that'd really only be an issue for the first time we're printing a new file).
FpUser 6y ago
>"I'm having trouble imagining more than say 5" That's ok. People have different needs. For me it is mostly many hard drives, exercise equipment, multiple cameras, some stuff I am testing and lots of smaller things.
deeblering4 6y ago
I’ve got a bunch of audio related USB kit. Audio interfaces (sound cards), midi controllers, samplers, external drives, control interfaces, synths, etc. Fills up the better part of two 8 port hubs.

rbinv 6y ago

I'm curious: what kind of devices? Seems like a lot.

karma_fountain 6y ago
Maybe USB 3g dongles for running a click farm?
- FpUser 6y ago
  Are you reflecting on your own experience?
pcdoodle 6y ago
Cameras, Sensors, Barcode, Scales, Etc.