4 ms·
Rpi4 and still no usb version of bootloader. What am I missing? # rpi-eeprom-update BCM2711 detected BOOTLOADER: up-to-date CURRENT: Tue 10 Sep
by snvzz 6y ago
Rpi4 and still no usb version of bootloader. What am I missing?
# rpi-eeprom-update
BCM2711 detected
BOOTLOADER: up-to-date
CURRENT: Tue 10 Sep 2019 10:41:50 UTC (1568112110)
LATEST: Tue 10 Sep 2019 10:41:50 UTC (1568112110)
VL805: up-to-date
CURRENT: 000137ab
LATEST: 000137ab
I wish this was better documented.
- simongr3dal 6y agoYou gotta do: $ sudo apt update $ sudo apt upgrade $ sudo apt dist-upgrade Then do a restart and the bootloader should be updated, if that doesn't work you also need to do a: $ sudo rpi-update Now the eeprom should be updated and the default option should be to boot from SD, then USB.
- snvzz 6y agoThat's the easy way for Debian or Raspbian users, sure. But I am on archlinuxarm. I have used rpi-eeprom-update in the past with no issue, but it won't see the update this story is about, for reasons unknown.
- snvzz 6y ago... figured it out. rpi-eeprom is not in archlinuxarm, but rather, I did install it ages ago from the AUR, manually. There's a new version, which does the trick. It turns out, the updater does not look online for the latest version as I'd imagine it did, but rather, it looks at a local path, and the hope is that the distribution will take care of the latest firmware being in that path for you.
- kingosticks 6y agoThere is a section of the documentation labelled 'Updating the bootloader' at https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md https://www.raspberrypi.org/documentation/hardware/raspberry...