4 ms·
For the software part, WLED [0] really does just about anything you’d want to do with those led strips. I drive the wemos d1 and led’s from a 12V battery with
by andruby 6y ago
For the software part, WLED [0] really does just about anything you’d want to do with those led strips.
I drive the wemos d1 and led’s from a 12V battery with a 12-5V stepdown converter. I attach the 5V to the esp and the led’s. The 3.3V logic level works on the first led and is repeated at 5V to all subsequent led’s.
[0] https://github.com/Aircoookie/WLED https://github.com/Aircoookie/WLED
- fullstop 6y agoApparently 3.3v doesn't always work with the strips, and newer ones are less likely to work, especially if you're working with a lot of lights.
- andruby 6y agoMy assumption was the each individual led chip will re-transmit the signal to the next led, which in effect will turn the 3.3v signal into a 5v signal between the 1st and subsequent leds. The power lines do sustain voltage drop over longer sections, so you'll want to add extra power every few meters.
- fullstop 6y agoRight, that is exactly how it works. If your signal to the first IC isn't perfect, and it isn't with a 3.3v signal, you can end up with incorrect colors or shifted patterns. As you add more LEDs you have a greater chance of one at the end not lighting up or having incorrect colors throughout the string. 0.7 * 5v == 3.5v, and 3.3 < 3.5. You're out of spec for the part and can't expect it to work reliably.