3 ms·
Apparently they plan to include a PowerVR GPU on the second generation boards. That's not very OSHW if you ask me. I'd rather an unaccelerated framebuffer, or
by snvzz 6y ago
Apparently they plan to include a PowerVR GPU on the second generation boards.
That's not very OSHW if you ask me. I'd rather an unaccelerated framebuffer, or even no graphics at all.
They don't seem to understand what kind of market there is for this sort of device. If I didn't care about this sort of thing, I would just grab one of the many proprietary-encumbered SBCs, any of which faster and cheaper than this board is going to be.
- cmrdporcupine 6y agoI'd also be fine with something with a very simple framebuffer. They should consider throwing HDMI or display port or on their V1. Or hell, why not the "Display Parallel Interface" DPI thing that's on the RPI. I suspect they'd find the market for that would be fairly significant. At these clock rates and with multiple cores plenty can be done without acceleration.
- monocasa 6y agoFWIW, every chip I've seen with a PowerVR GPU uses a video scan out engine that's pretty much completely disconnected from the GPU. That's one of the neat things about how programmable their cores are; you can resolve in the tile to just about any surface format since it's all done in software anyway, so it's really easy to integrate with other scan IP blocks. TL;DR: You'll probably get a simple un-accelerated framebuffer (maybe with a few planes) with a PowerVR off to the side that you can just ignore if you want.
- snvzz 6y ago>with a PowerVR off to the side that you can just ignore if you want. The problem is that I can't, and most people who care about freedom and thus could be interested in a slower, more expensive board... can't either.
- monocasa 6y agoOf course you can, just ignore it, and pretend it isn't there. Don't even load its drivers. Because of dark silicon, you won't be able to fully light up the chip anyway. Use the GPU being off to clock other parts faster if you want. You still get an unaccelerated framebuffer if it has the same arch as every other chip I've seen with a PowerVR for the past twenty years (Dreamcast, BeagleBoard, iPhones, PSP Vita, the MIPS board they came out with that I'm forgetting the name of).
- snvzz 6y ago>Because of dark silicon, you won't be able to fully light up the chip anyway. If it's a separate chip, that's better, because I can cut power to it, or outright desolder it. Still, I'd be uncomfortable having paid for a chip I did not want. Much like being forced to pay for Windows when buying a laptop to run netbsd on. My point, if you missed it, is that this is not the sort of purchasing experience those who'll pay extra coin for a board with a slower chip that's also less power efficient just because it's more open would actually desire. And thus, it is not sensible to include such a chip.