3 ms·
Great, and ideally gravity can be used to move it. Remember, at Fukushima power to the pumps was lost.
by phkahler 6y ago
Great, and ideally gravity can be used to move it. Remember, at Fukushima power to the pumps was lost.
- tpxl 6y agoAfaik some reactor designs drop the core in a tank below in case of emergency.
- asdfman123 6y agoThe article states the whole reactor will be submerged in a pool of water, making it passively safe.
- meepmorp 6y agoReactor cores continue to produce waste heat when shut down, and water evaporates. It’s passively safe till you run out of coolant, then it’s actively dangerous.
- throwaway0a5e 6y agoAnd if you size the pool right it will by cool before the pool boils off. It's simple math and engineering.
- ixfo 6y agoIn this case the pool boils off slowly enough from thermal load to let decay heat reduce to the point where air cooling is adequate. So it remains passively safe unless there is a sudden loss of water from the pool. Engineering a very resilient pond does not feel like as complex a problem as engineering highly complex cooling systems to be resilient.
- garmaine 6y agoThe reactor is submerged in the pool. It’s a passive design.
- AngryData 6y agoIt also helps to not be running a reactor based on designs from the 1950s and then decades later ignore all the known potential problems.
- _jal 6y agoIt does, but it makes sense to explore fail-safe designs. Depending on a lack of incompetence in dangerous systems works until it doesn't. To the extent that these things can simply halt when incompetently managed, they should. If anyone disagrees, I'd like to know why they think the next hundred years are going to be so much freer of political shortsightedness and corruption than the last hundred.
- cameldrv 6y agoFukishima is a perfect example. Unit 1 had been retrofitted with an isolation condenser, which should have been able to prevent a meltdown even with no power, but it wasn't activated, for reasons that remain murky.
- Gravityloss 6y agohttps://en.wikipedia.org/wiki/Isolation_condensor https://en.wikipedia.org/wiki/Isolation_condensor Sounds like a quite simple design indeed, and only one valve opening away from use?
- URSpider94 6y agoNothing has to move it. It’s in a pool and always there. The pool is big enough to sink all of the decay heat of the reactors it hosts, without needing a refill or heat exchange.