3 ms·
The processor was covered recently here as well. https://news.ycombinator.com/item?id=24109437 https://news.ycombinator.com/item?id=24109437 One neat aspect i
by monocasa 6y ago
The processor was covered recently here as well. https://news.ycombinator.com/item?id=24109437 https://news.ycombinator.com/item?id=24109437
One neat aspect is it was intended to allow the use of an off chip, MMIO ALU if the design required it (and was still faster than a 6502 even with the separate ALU).
- kens 6y agoYes, the HP voltmeter used two 74LS181 ALU chips so it could do error and scaling calculations. The ALU was accessed through four I/O ports: two for the arguments, one for the operation and carry-in, and one to read the result. It wasn't memory-mapped, but I/O mapped since the Nanoprocessor didn't have memory operations (except reading instructions from ROM). Instead of memory-mapped I/O, the Nanoprocessor had I/O-mapped memory. The real time clock module had 256 bytes of RAM that were accessed through I/O ports.
- monocasa 6y agoWhat's the distinction you're making between mmio and I/O mapped? That it only has absolute addressing? Or that it just calls it I/O?
- kens 6y agoMemory and I/O were separate spaces with separate pins and separate operations. The Nanoprocessor had 11 address lines for reading instructions from a 2K ROM. It had 4 I/O device select lines for accessing 15 I/O devices. So if you added RAM (as in the real time clock), the RAM was accessed through I/O instructions. You'd write the address to one port and read the data through another port. It ended up looking a lot like microcode, with memory accesses split into two pieces.
- deleted 6y ago[deleted]