4 ms·
For people who want to store lots of stuff. Not everyone has a photo library or media library or game collection that fits onto a reasonably priced SSD.
by mlyle 6y ago
For people who want to store lots of stuff.
Not everyone has a photo library or media library or game collection that fits onto a reasonably priced SSD.
- jeffbee 6y agoIt seems like people who need moderate tens of terabytes of storage would be _more_ interested in the performance and reliability of an SSD, not less. If you have demanding storage needs aren't you then more likely to be willing to pay $100/TB for storage?
- jmnicolas 6y agoThere's no reliable storage, only backups of backups. So in the end the choice is SSDs if you need fast storage or hard drives if you need cheap(er) storage. Even if SSDs were priced the same as hard drive you would need much more SATA ports on a machine to achieve a big storage capacity.
- jeffbee 6y ago> you would need much more SATA ports on a machine Why? There are 16TB SSDs u.2 SSDs on the market. That is comparable to top-of-the-line hard drives in terms of bytes per port and much, much better in terms of bytes per volume.
- wtallis 6y agoU.2 is a different kind of port, and one that's in notoriously short supply on all but the most expensive platforms. Even if you could get U.2 SSDs at the same price per TB as hard drives, you still need to spend a lot more to get them connected and keep them cool (enterprise SSDs don't have low-power idle states).
- jeffbee 6y agoThis conversation is increasingly weird. Enterprise SSDs definitely do have low-power modes. The Samsung PM983 I've used at scale draws 4W when idle or 11W active. A 14TB Seagate HDD like the one recommended in the article draws 5W minimum. The SSDs have a 5 milliwatt non-operating mode they can exit in less than 30ms, which is dramatically better than the latency of a non-operating hard drive (and turning a hard drive off wears it out, too). The SSD wins in this regard. It's also virtually impossible to overheat an SSD. Samsung SSDs have critical temperatures above 90C. You won't reach this temperature just by operating the drive. The only way I've been able to make a Samsung SSD trip the critical temperature alarm was by pointing a paint-stripping air gun into the fan inlet of a machine while running an fio workload. HDDs by contrast are trivial to overheat, and are destroyed by doing it.
- wtallis 6y ago> The SSDs have a 5 milliwatt non-operating mode they can exit in less than 30ms, Which mode exactly are you referring to? Because the 983 DCTs (retail version of the PM983) that I have don't support features like NVMe APST, and idle at 3+ W (for the M.2 version, which is lower-power than the U.2 version). > It's also virtually impossible to overheat an SSD. Maybe in a properly designed rackmount enclosure with fans that never drop below 4k RPM. But in a more typical consumer case, enterprise U.2 drives will absolutely overheat, and I have the logs to prove it. (The Samsung drives you refer to are definitely better about this than the kind of U.2 drives that use 15mm thick cases and controllers with more than 8 channels—which I believe includes all U.2 drives with capacity in excess of 8TB.) Consumer cases that still have 3.5" bays tend to provide plenty of airflow for them, but that's not the case for 2.5" bays.
- jeffbee 6y agoMaybe we should avoid the specifics of Samsung, since they are in the habit of shipping different firmware to retail and bulk buyers. I've never used the retail 983, and I have no experience with the u.2 either. All I can say for sure is you cannot overheat the stick version. If it overheats that's because your datacenter is on fire. I can replicate this at home with a Samsung 970 PRO m.2 in an Intel NUC. It just will not overheat. The only thing I can do to make it shut down is to put blankets over the NUC in which case the CPU has gone PROCHOT anyway. Bottom line, it seems to me that power and heat are advantages of SSD, not HDD. It seems like people buy HDD purely because of GB/$, which makes sense to me at scale but not at home. The care and management of hard drives, and their atrocious performance, seems to outweigh the price advantage. It's really hard to manage HDDs successfully and even if you are doing it perfectly, it still means you are replacing the HDD every 3-5 years. What a pain.
- jmnicolas 6y agoThe article is about consumer hard drives, but I guess if you have an infinite budget and access to any hardware you want there's no point at looking at hard drives. If we take my case at home, I would need about 30 TB of total capacity to be at ease. Let's disregard my previous comment about backups of backups and go for "just" 60 TB total capacity. Where I live I can only reliably source 14 TB hard disks at €400 a piece and 4 TB SATA SSDs for €550 (I didn't look at NVME since the number of ports possible on one machine is too small). So I would need 5 disks for 2000€ or 15 SSDs for 8250€. Almost any motherboard comes with 6 SATA ports but for the SSDs I would need to add at least one PCI Express raid card to get more SATA ports. FWIW I could buy the cheapest new car available in France for the same price as the SSDs (Dacia Sandero base model).
- wtallis 6y agoHome users that want to store tens of TB of data are highly unlikely to need fast access to most of it. A large personal movie collection never needs more performance than a single hard drive offers. An incremental backup archive is not performance-critical while adding new backups, and restoring from backup is infrequent enough that it's not worth paying an order of magnitude higher for better restore performance. A video game collection can see some benefit from faster storage, but it's still cheaper and easier to shuffle games in and out of local ~1TB SSD storage than to establish high-speed access to a solid-state NAS.
- rbanffy 6y agoDepends on access patterns. If you have tons of video, audio, sensor data, the access is mostly sequential and processing it is mostly CPU bound (unless you have a remarkable workstation). If a hard disk costs about half per TB than an SSD, you can RAID-1 2 of them for twice the reliability and read speed. More disks, more reliability and more speed. Here where I live I can get a 6TB serious HPE SSD for €1781.63 or a 4TB consumer grade unit for €671.88. For that amount of money, I can get a 3-drive RAID-1 of Hitachi 10TB disks or, better, a 2-drive RAID-1 (certainly not as fast as the HPE board) and keep the third disk in another machine and do backups there (because the reliability of an SSD means nothing if the data is erased).
- tgeorge 6y agoNot necessarily you can have terabytes of just video footage or photos which isn't that performance intensive or just plain old backup. Depends on the use case and price. Plus I have had a Samsung SSD fail on me and had to RMA it. So I would tell anyone SSDs are not fail proof.
- mlyle 6y agoConsumer + lots of storage usually equals lots of cold data that you don't care how fast it is. Lots of cold data without strict performance requirements calls for spinning disks still-- whether we're talking about enterprise or consumer. Paying $100/TB for things that I might access once per year and will still be close to instant when I choose to (video, photo) is silly when I can pay $250 for a RAID-1 pair of 12TB drives.