6 ms·
If you are already using and arduino, couldn't you the use it as a HID device and send the keyboard (not sure if it does mouse as well) directly without going t
by blensor 6y ago
If you are already using and arduino, couldn't you the use it as a HID device and send the keyboard (not sure if it does mouse as well) directly without going through a PS/2 emulation?
- deleted 6y ago[deleted]
- flotwig 6y agoLooks like it's not supported on the Nano, Trinket, or Uno, which were the only devices I had laying around: https://arduino.stackexchange.com/a/39638 https://arduino.stackexchange.com/a/39638 Otherwise, that would work fine, but not all motherboards support power-on via USB HID, most support PS/2 though.
- rdc12 6y agoYou could also hook up a GPIO pin to the wires for the power on button
- ThatPlayer 6y agoYou can do it on the Uno, if it's real (or close enough) Uno that uses an atmega16u2 for the USB connection. Using HoodLoader2 like that post mentions: https://github.com/NicoHood/HoodLoader2 https://github.com/NicoHood/HoodLoader2 . Most Uno clones skip the atmega16u2 and use a cheap USB to serial adapter instead, which will not let you reprogram it as a USB HID
- flo123456 6y agoThis would probably work well with a Teensy: https://www.pjrc.com/teensy/ https://www.pjrc.com/teensy/