5 ms·

Building PC in 2020 is so easy - like two cables, chase, cpu, ram and video. Drive is probably just m2. So much easier than back in the day.

• sbierwagen 6y ago
  Chase?
  • ribosometronome 6y ago
    Probably an autocorrect meant to be "case" or "chassis", lucky they both mean the same thing in this context!
• distances 6y ago
  It's very easy indeed, but will still take hours for component research and hours for building (for a first-timer). It makes sense if you like this kind of thing. If you're not into it, buying prebuilt is a valid option.
  • deaddodo 6y ago
    Eh, IDK. It'll definitely take some research, to maximize everything. But there's so much uniformity these days, that you could figure out your build in an hour or two. And, if you're not going for SFF or the like, have a build complete in less than 30-45 minutes after watching a YouTube video. This isn't the 90's/00's where you had to match graphics interfaces, FSB timing, RAM sockets/timing, modular vs cabled PSUs, set jumpers, configure components' master/slave relationships, run molex's/splitters, maximize board fans, clump case/button/etc connectors, terminate sockets, etc, etc.
    • hddherman 6y ago
      There are still plenty of topics that make sense to an experienced builder, but not the novice. * does my motherboard m.2 slot support PCIe or SATA m.2 SSD-s? * on AMD motherboards: will my CPU work out of the box or do I need a loaner CPU to perform a BIOS update? * using the wrong fan header on the motherboard for your AIO water cooler * not setting the proper XMP profile for your RAM Those are the ones that I could think of immediately.
      • deaddodo 6y ago
        > does my motherboard m.2 slot support PCIe or SATA m.2 SSD-s? Definitely SATA, most likely m.2 as well. They're not either/or. More likely, you'll run into exhausting your PCIe lanes and might knock your GPU into 8x/4x mode or your additional SSD's into the dedicated SATA lanes. > on AMD motherboards: will my CPU work out of the box or do I need a loaner CPU to perform a BIOS update? Unless you fall into a very specific set of Motherboards from during the Zen -> Zen+ transition, the answer is no. > using the wrong fan header on the motherboard for your AIO water cooler Any header will still work, and it's not catastrophic anyways. Just change it if you got it wrong. Realistically, any modern motherboard will have the CPU fan header marked clearly, as opposed to the chassis headers. > not setting the proper XMP profile for your RAM The point of XMP is that you don't have to choose the profile. You just choose "XMP custom" (or however your motherboard manufacturer labels it) in the UEFI settings. If you don't, you'll get standard JEDEC RAM timings, which is hardly going to stop you. I mean, your off the top of your head examples are all pretty easily solvable and probably wouldn't even be encountered unless you were specifically looking for them anyways. And if you don't configure them, most will Just Work (tm) at default configurations.