3 ms·
My Home Assistant is running on a Raspberry Pi 3B+. It has been running on the same SD card for two years now, with a large sqlite database and with debug loggi
by magicalhippo 6y ago
My Home Assistant is running on a Raspberry Pi 3B+. It has been running on the same SD card for two years now, with a large sqlite database and with debug logging enabled for Z-Wave so a fair amount of writing to the card.
It has only been down when the power has been out, and so far no issues with the card. It is however an A1 or A2 class card (I forget which), so supposedly design with applications in mind.
It should also be noted that a lot of issues with the Pi is due to poor USB cables / power supplies. I had another Pi that kept crashing every few days, until I measured the USB "charger" cable I was using for it. Turns out it had a resistance of almost exactly 1 Ohm. So if the Pi drew say 1A, that would be 1V loss in the cable... After I swapped cables it has been rock solid. A key point here is that a lot of SD cards do not like losing power while being written to. Avoid that and a quality SD card should have a long life.
- silicon2401 6y agovery helpful input, thanks a lot!