3 ms·
IC2 is not populated but the pinout looks like an I2C EEPROM, so it could be used for storing settings. The pinout of the main IC doesn't match a PCM2902E, and
by userbinator 6y ago
IC2 is not populated but the pinout looks like an I2C EEPROM, so it could be used for storing settings. The pinout of the main IC doesn't match a PCM2902E, and in any case that doesn't have an EEPROM function.
The ratio between the motor and turntable is likely 34:1, as that gives some reasonable speeds...
1130 / 34 = 33.24
1520 / 34 = 44.71
2360 / 34 = 69.41
...except for the last one which is presumably for 78 but quite a bit below.