4 ms·
68K single board computers are fun. Here's the one I did in college in 1982 [1][2]. 6 MHz 68K (I think). 4K 16-bit words of EEPROM. 1K 16-bit words of static RA
by tzs 6y ago
68K single board computers are fun. Here's the one I did in college in 1982 [1][2]. 6 MHz 68K (I think). 4K 16-bit words of EEPROM. 1K 16-bit words of static RAM. Two RS-232 ports.
The way the class worked was that they would supply the processor, and I think they may have also supplied the RAM, but everything else you were on your own for. Anything you see in those photos that makes you wonder "Why the heck did he use that!?" probably has the answer "It was cheap".
That's why it is on an S-100 bus prototyping card--I found that at a surplus store. That's why the reset button says "CLR"--the Caltech EE stockroom had for some inexplicable reason a box full of cheap buttons from some old calculator. That's why the power connector is weird--found that and its mate at the same surplus store I found a power supply.
I put a nice feature in the RS-232 connections. Note that the cable between the RS-232 connectors and the board plugs into an ordinary DIP socket, which is not a keyed connector. The way it is wired up is that it works both ways, but one of the ways is like using a null modem.
There was one very amusing incident when I was writing software for it. The 68K cross assembler ran on Caltech's IBM 370. There was some HP workstation in the lab that you could enter your code on and it could submit it to the 370 for assembly and retrieve the output.
The HP workstation was a few years old, and no one really knew much about it. It ran some weird OS and nobody had bothered to learn much about it--they just all knew enough to edit, submit stuff to the 370, and do simple file manipulation.
The thing was full of several years accumulated projects from students, research code from professors, and who knows what else, so space was tight and no one really knew what was safe to delete.
One day I'm using it to submit my code to the assembler, and I notice that in a lot of the file command there was some letter or digit (I forget which) that you had to include but didn't seem to have an obvious purpose.
So I did the obvious thing--I tried one of the commands but with that letter or digit incremented.
It turned out that was the drive specifier, and I was now using the second drive in the workstation--a drive that nobody else knew it had and was completely empty. They had been struggling with lack of free space on this thing for years, and all that time there was a second drive in it just sitting there empty!
[1] https://i.imgur.com/Ts9wcfW.png https://i.imgur.com/Ts9wcfW.png
[2] https://i.imgur.com/3D4rvdC.jpg https://i.imgur.com/3D4rvdC.jpg