6 ms·
The Atari ST had its own way of dealing with this that didn't use the standard 68k trick. As explained by EmuTOS contributor, Vincent Rivière: "Note that such
by cmrdporcupine 6y ago
The Atari ST had its own way of dealing with this that didn't use the standard 68k trick.
As explained by EmuTOS contributor, Vincent Rivière: "Note that such "standard trick" is not used on Atari ST hardware. The first 8 bytes of the address space are always remapped to the start of the ROM. So the first 8 bytes of RAM are always inaccessible, as they are shadowed by the ROM. Actual usable RAM starts at address 8, even of cold boot."
Basically as I understand it, RAM "starts" at 0x000000 but is only writable at 0x000008 and beyond. So the first 8 bytes is actually ROM and be used to jump to the rest of the ROM. The rest of the vectors after 0x000008 are written to by the OS as it boots.
A little fiddly in the address decoder, but maybe less complicated than timer tricks and the like.
Your 68k + FPGA project sounds interesting. There's another one that's been discussed on the EmuTOS list lately, that is using an older MAX10 FPGA which is 5v tolerant. But 68000, not 68010. I think mainly because the 68000 was produced in packages that could do higher clock rates, while the 68010 never made it above the low teens.
But have you thought of just using Coldfire?