4 ms·
The memory map hurts. 68000 doesn't have a vector base register like 010+. Instead, the vector base is always 0x0, which here is in ROM, which is too much of a
by snvzz 6y ago
The memory map hurts.
68000 doesn't have a vector base register like 010+. Instead, the vector base is always 0x0, which here is in ROM, which is too much of a restriction. Installing a 010 instead should allow for getting around this.
Also blatantly missing is a NMI switch.
Still, it always makes me happy when I see open SBC designs based on the 68k family. Retrobrew[0] has a bunch of them, and they are less restrictive, or use 030 instead of 000/010.
[0]: https://www.retrobrewcomputers.org/ https://www.retrobrewcomputers.org/
- musicale 6y ago> Also blatantly missing is a NMI switch Like a "programmer's key?" ;-) https://en.wikipedia.org/wiki/Programmer%27s_key https://en.wikipedia.org/wiki/Programmer%27s_key
- snvzz 6y agoI've had to make myself one for the Amiga 500. Just IPL lines -> diodes -> switch -> GND. The IPL lines can be found on CPU socket, Paula socket and left expansion port.
- bilegeek 6y agoUnfortunately, it seems like the 68010 is the only one completely out of production. You can find all the others easily on Digikey, even the '060. It seems like the 68030 would be ideal for both power and simplicity; 32-bit, better than the '020, yet easier to build than an '040 or '060 because it still has dynamic range bus addressing[1]. [1]http://s100computers.com/My%20System%20Pages/68030%20Board/68030%20Board.htm http://s100computers.com/My%20System%20Pages/68030%20Board/6... (ctrl-f for dynamic range bus addressing)
- snvzz 6y agoOut of production is most relevant at scale. Not as much as a hobbyist. 010 are easy to get from china. Some of them might be modern made clones, but I couldn't care less if they're equivalent. This many years later, it shouldn't be hard. 030 is indeed great, although no dip variant anymore.
- noone_youknow 6y agoYou do have to be careful with 68010's from China... I have a couple hundred remarked 68000s that I bought as 68010s before I got good at spotting fakes and knowing who to deal with. I just keep them in a box to take them out of circulation, it's not even worth the hassle of returning them...
- snvzz 6y agoThe ones I have do have the VBR, so they are legit 010. Of course, buying from China is what it is. They are however 8/10MHz. Likely pulled from boards. 14MHz DIP are supposed to exist, but unobtanium.
- cmrdporcupine 6y agoYeah I was going to comment that this could boot headless EmuTOS, but the choice to put the vectors in ROM means it can't.
- msarnoff 6y agoProject author here, I agree. This was a toy project that I allocated a fixed amount of time to, hence the cut corners. I'm working on another design that uses programmable logic to handle multiple interrupt sources (yes, including an NMI button) and allow either ROM or RAM to be banked into address 0.
- snvzz 6y agoI'm looking forward to that :)