4 ms·
Great. At 12MHz and 1M RAM that's still above an Atari ST or Amiga 500. There used to be plenty of such computers based on 8bit to 16bit discrete CPUs (Z80, 68
by mytailorisrich 6y ago
Great. At 12MHz and 1M RAM that's still above an Atari ST or Amiga 500.
There used to be plenty of such computers based on 8bit to 16bit discrete CPUs (Z80, 680x, 8255, etc), with schematics in electronics magazines.
This was great because everything was simple enough that you could fully understand and use 100% of the hardware yourself and code 100% of the software yourself. And all components were standard discrete ones (like this project), not SMCs, so there were also very easy to handle.
You did not even need a PCB. I once built such simple computer based on a Z80 using good old wire wrap [1] on a prototyping board, which was quite a common thing to do, but quite a torture to be honest and I would not want to try with a 68000...
[1] https://en.wikipedia.org/wiki/Wire_wrap https://en.wikipedia.org/wiki/Wire_wrap
- jacquesm 6y agoHaving worked on a fairly large 68K board that was wire wrapped I would not recommend it.
- dboreham 6y agoI built one with graphics floppy and scsi. Wasn't too bad mind you I was 19 so had infinite spare time and I worked the summer for a defense contractor so had unlimited wire wrap wire and gold plated sockets.
- jacquesm 6y agoI worked on a prototype board that was getting a little older (I did not wrap the original), apparently the tension of the wrapping tool was off or something else did not go according to plan during the original build because quite a few of the connections were flakey and had to be redone. This can be pretty tricky if there are sometimes 6 wires running to one pin and the whole thing is a rats nest of identically colored wires. I did get it all sorted out and working again but that wasn't my idea of having fun. Fortunately I got into software from hardware or I would have likely given up. You know you have a nasty problem when tapping the board can make it crash. Shades of Gollum and Coke.
- musicale 6y agoWire wrapped connections can actually be more reliable than soldered but a 16/32-bit 68K design is going to be at least twice the work (and twice the wires) of an 8-bit Z-80 design...
- jacquesm 6y agoThey indeed can be. When wrapped properly... I liked working on that board once it was brought up but the first two weeks seemed to last forever with minimal progress. Wire wrapped boards critically rely on the tension of the wire during the wrapping to make good metallic contact in such a way that oxidization can't make the connections degrade. The big advantage over soldering in my view is that you an 'unwrap' without damage to the pins in case of errors. If you do that with a closely populated board that has wires that have been soldered you will likely cause some damage.
- snvzz 6y ago>Great. At 12MHz and 1M RAM that's still above an Atari ST or Amiga 500. If CPU clock and base ram is all you care about, sure. The Amiga and the ST(E, the ST was pretty sad actually) chipsets did far more than some cpu paired with some ram.
- deleted 6y ago[deleted]