4 ms·
This is an absolutely amazing innovation, but bike thieves have already progressed to using powder-actuated pistons in order to break the internal mechanism of
by sudosysgen 6y ago
This is an absolutely amazing innovation, but bike thieves have already progressed to using powder-actuated pistons in order to break the internal mechanism of a lock. Much faster and easier than cutting anything.
- throwawaysea 6y agoHow does that work?
- ximeng 6y agohttps://youtu.be/Wimo09WV-rY?t=237 https://youtu.be/Wimo09WV-rY?t=237
- deleted 6y ago[deleted]
- sudosysgen 6y agoEssentially, the powder actuated piston fires a blank round and uses the pressure in order to propel a mass, that hits the lock and, assuming that the lock is restrained in the opposite direction, creates an immense force that destroys the internals of the lock and forces it open, all in less than a second.
- wincy 6y agoIs this sort of like the weapon the guy in No Country For Old Men was using?
- wiml 6y agoI don't remember the movie well enough, but it might have been a captive bolt gun (typically used for slaughtering livestock)?
- thechao 6y agoThat's a captive bolt gun. It's used to kill cattle for slaughter.
- gruez 6y agoDoesn't that use compressed air?
- catalogia 6y agoThe one shown in that movie uses compressed air. Some other sorts use powder charges, just like a powder actuated nailgun.
- SV_BubbleTime 6y agoPneumatic
- teruakohatu 6y agoMaybe in YouTube videos but I have not heard of people using Ramsets to steal bike in real life. Firing a gun is a good way to get people call the cops. Edit: I am wrong!
- sudosysgen 6y agoThe new Ramset guns are surprisingly quiet. Certainly, the police won't be called, and there's not much of a risk to the thief. This is because unlike a gun, there is no need for the gases to release to the outside openly. Therefore, there is much, much less noise, and it doesn't sound like a gun at all.
- quickthrowman 6y agoI wonder if the battery-powered propellant-free Hilti fastener shooter would work, those things are extremely quiet!
- walrus01 6y agoIt's my understanding that the actual propulsion of a nail is no more powerful than a powder actuated tool, which use cartridges similar in power to the very small .22LR
- Godel_unicode 6y agoDo you have lots of experience looking at reports of stolen bikes? I have heard exactly the opposite in my major metro area. My sources are law enforcement and bike clubs.
- fortran77 6y agoNobody will stop you in San Francisco.
- mindcrime 6y agoNot to mention pre-cutting bike racks themselves (and handrails, etc. that people lock their bikes to), and then putting some duct tape or something over the cut. When they get ready to take your bike they don't have to cut a thing. Just lift up the cut section, slip your chain/lock through the gap, and go.
- perl4ever 6y agoThat's brilliant. It reminds me of people who have written about how disappointing magic tricks generally are when they're revealed, because you think "I could have thought of that" but you probably couldn't.
- sethhochberg 6y agoEven without a pre-cut rack, its pretty common that whatever you've locked up to (sign post, bike rack, parking meter, handrail, etc) is a lower grade of steel than the ultra-hard stuff on the shackle of a good bike lock or chain anyways. No need to pre-cut that cheap galvanized steel sign post if you don't want to, a thief would have no problem getting through it quickly if something attractive was locked up. I'll use about $100 worth of u-locks to lock up my not-super-visually-impressive $250 spare parts city errand bike as long as overnight (and this is in NYC). But I think the strike point where spending more on heavier/fancier locks to secure a more valuable bike just stops making sense is right about at the price point I'm already at, most nicer bikes are simply too nice to leave unattended on city streets in the US or anywhere else where bike theft is a concern. Someone with a good set of pocket tools could rip $500 worth of parts off a well-locked frameset and wheels in 20 mins without making any noise... and I don't think a non-cuttable material helps that scenario, even if it does make very secure locks attainability light. (Could be a really big deal for bike touring folks though, who often ride out with a cheap cable lock at best because anything better is too heavy to carry for days/weeks)
- taneq 6y ago> its pretty common that whatever you've locked up to (sign post, bike rack, parking meter, handrail, etc) is a lower grade of steel than the ultra-hard stuff on the shackle Way back in highschool this always used to baffle me. You'd get kids spending $50+ on super fancy locks for their lockers, but all these locks equally were fastened to the locker with a flimsy little hasp that you could cut with a pair of tin snips, assuming you didn't just bend back the door of the locker itself.
- mattigames 6y agoLocks should have a layer of explosive material inside, so firing the powder-actuated tool (PAT) may ignite the explosives and destroy the PAT itself, and it would help too by making some very strong noise so people may hear something is going on.
- sudosysgen 6y agoAre you going to make that explosive sensitive to shocks? Otherwise, how is it going to ignite? And if you would do so, you realize how dangerous that is, right?
- quickthrowman 6y agoI’m sure the legal department of the lock manufacturer would recommend against that..
- godelski 6y agoBooby traps are illegal.
- egypturnash 6y agoYou can do whatever you want with your bike but I sure am not carrying something designed to be activated by a strong jolt on my bike when I bike through decaying city streets full of potholes and bumps and other fun stuff like that.
- walrus01 6y agoIn any major city really the solution is to never lock anything up in public that is worth more than $400 or so. I have two road bikes, the insurance replacement value of each would probably be $3000, and I wouldn't even dream of buying a lock. I literally don't even know where my lock is. The last time I saw a lock was when I put it in a box of stuff on a shelf in my garage 10+ years ago. If you have a nice road bike with very clean tires people generally will not mind you bringing it into places with you consistently. No matter how good your lock is, if somebody REALLY wants the bike (for the value of its components) they'll just saw the frame in half.
- blacksmith_tb 6y agoNot sure I follow, I take it by implication you have renter's or homeowner's insurance, in which case your replacement cost is the deductible - and $400 is a common deductible. Now, getting a bike set up the way you had yours is a pain, granted. I think it's pretty unlikely that even desperate thieves would saw through your frame, they want to be able to resell as much of the bike as they can, and the frame is a fairly valuable component...
- Godel_unicode 6y agoWe definitely mind, we're just too polite to tell you. Knowing your friend spends thousands (plural) on their bike makes you feel bad about not wanting their "clean" tires, which definitely didn't roll through dog turds and cat pee on the way there, on your floors.
- walrus01 6y agoTo clarify I did not mean taking a bike into peoples' houses, but commercial establishments that already see a high volume of foot traffic. The tread pattern and grip on any shoes collects far more feces and other dirt from sidewalks than a smooth treadless 700x23 tire.
- taneq 6y agoOn the plus side, multi-thousand-dollar bikes can be lifted with one hand and slung over your shoulder if you're a courteous rider.
- floatingatoll 6y agoI hope this thread results in an FP post about this, because I am super curious now and there's only tidbits here ("engine pistons?" "what's a ramset?").