3 ms·
I've been using a "936-style" (a clone of the famous Hakko 936) iron with an analog controller for many years and I see excessive complexity as a liability ---
by userbinator 6y ago
I've been using a "936-style" (a clone of the famous Hakko 936) iron with an analog controller for many years and I see excessive complexity as a liability --- a soldering iron certainly does not need a microcontroller to function.
That said, I haven't seen any models with an analog temperature gauge...
- myself248 6y agoCertainly doesn't, but I've come to very much appreciate my TS100's brains. And accelerometer. Being able to idle back when it hasn't moved in a while, but recover quickly when I pick it up, used to require magnets and a reed switch in the holder. But the TS100 can do it in any holder, simply by looking for movement in its accelerometer. Being able to turn itself the rest of the way off after a longer period seems a nice safety measure. Pushbutton temperature adjustment isn't perhaps as simple as a knob, but the realtime display of tip temperature is awfully nice to know how long it takes my commands to have an effect. And, since it can sense the input voltage, some firmwares have automatic shutdown for various lithium cell voltages, in case you're driving it directly from a battery pack like many R/C hobbyists do in the field. I've never met another portable iron with that feature. Is it excessive for a basic desk iron? Yeah, probably. But it's amazing as portable go-anywhere iron, which is also capable enough to replace my desk iron. I'm a fan.
- ficklepickle 6y agoI wired a triac inline with my cheap soldering iron. I turn it down a bit to save the tip during regular operation (it gets too hot at full mains voltage), and I turn it way down if I'm doing something else for a minute so it stays warm. The triac mangles the sine wave, but this resistive heater doesn't mind. I did this on a whim but it ended up meeting my needs quite well.