12 ms·

Ask HN: Anyone have a really smart way to organize css?

• karl11 16y ago
  I'm hoping for some good answers here, because I'd love a better way. I always put universal elements first (body, img, @font-face, etc.), then I just organize it top to bottom by page location (i.e. header, content, sidebar, footer, etc.). I also tab-indent so that elements within another are indented and "contained" underneath, making it easy for me to move from one section to the next. I also write the CSS horizontally, only making a new line for a new element. I should also note that I'm a n00b :-), so this could be a horrible way to do it.
  • Skalman 16y ago
    I do it more or less the same way, except I try to separate the layout from its content (I'll put #header, #content, #sidebar, #footer together, and later on define stuff that is specific to the content of e.g. #header). Also, when having quite a few properties for a selector, it's quite difficult to read when all is on one long line, so I use new lines for each property.
  • j79 16y ago
    With the exception of the horizontal CSS (personal preference - unless its compressed, I prefer things on new lines), I like everything you said. (I actually find the tab-indented elements really interesting and may have to try it on my next project!) One thing you didn't mention were comments. I've seen some css files with great commenting. For instance, comments at the top that act as an index/table of content for the css file. Very nice!
• weixiyen 16y ago
  I do it by widget and layout.
• tomfakes 16y ago
  Slightly related, but mainly a formatting issue, I format my css files as such: .foo { x: y; a: b } .bar { m: n } .baz { background: blah blah url(xyz.png) top left; x: y; i: j; } instead of the more commonly seen: .foo { x: y; a: b; } .bar { m: n } .baz { background: blah blah url(xyz.png) top left; x: y; i: j; } My format takes up less vertical space in the editor. Sometimes, I can get my entire CSS file into a single page on the screen, reducing the amount of time I spend scrolling and searching. I do split lines when they go off the edge of the space, as seen in the .baz example.
  • eam 16y ago
    I prefer the latter. It's more readable IMO. If file size is an issue, I just use a CSS compressor. Also, it's not too hard in finding selectors, most IDE's or text editors have a "Find" command to locate a selector. That's my 2 cents.
    • tomfakes 16y ago
      This isn't about file size at all, it is about being able to see as much CSS as possible at one time. My screen is wide, my editor is wide, my code is fairly wide, but the standard format for CSS is really narrow. Every time I see the vertical format in my editor, easily 80% of the window space is completely empty, and otherwise useless, and 80% of the CSS is not on the screen and I have to page up and down, or search, to find stuff. This is a workflow optimization that works for me. It might work for others too.
      • prawn 16y ago
        I do it too and for the same reasons. Just easier to keep your head around if you can see and scan more of the file at once. I tend to list properties with the most crucial to layout first so it's easy to find major problems (e.g., float, etc).
  • carterdea 16y ago
    why don't you let your IDE organize your selectors? As mentioned above, CSS Edit does a great job with this. With it, you get the readability of the latter formatting system and the scanability (not a word, I know) of the former system.
• STHayden 16y ago
  To be honest. With firebug's ability to tell me what line and css files the style on an element is coming from I don't find spending a lot of time on organization to have a ton of benefit.
  • j79 16y ago
    While I love Firebug, I'd have to counter that organization with CSS is actually quite important (and does have its benefits!) This is especially true when you're working either in a team environment or on a large site. The very nature of CSS (and how things cascade down) can become a nightmare when organization isn't taken into account from the start.
    • steverenz 16y ago
      I agree completely, especially on a web app that is constantly growing. 2 on-the-job things that help me the most are: 1. Using the 960 grid system (or your preferred grid flavor) 2. Grouping by the following: Body Typography Forms (Other global stuff like links and buttons) /* Layout Element 1 / ID1 {} ID2 {} class1 {} class2 {} / Layout Element 2 */ ID3 {} ID4 {} class3 {} class4 {} I also write my styles on one line, but that's just personal preference. I find it easier to scan down for the selector, then across for the property I want. I definitely don't do it for aesthetics or file size ;)
• bmelton 16y ago
  I haven't used it, as there just hasn't been a project with enough lead time to experiment with something lately, but I'm fond of the idea of code generators for CSS, like CleverCSS for Python and Sass for Ruby. Other than that, the best advice I can offer that I DO follow is that I group all HTML elements together, all IDs together, and then all classes together. Within each of those groupings, everything is in alphabetical order. body { foo: bar; } form { foo: bar; } h1, h2, h3 { foo: bar; } input { foo: bar; } p { foo: bar; } #container {} #footer {} #nav {} .etc {} .even {} .odd {} and so forth.
  • xdrone 16y ago
    my css is pretty simplistic like this also. one thing to do is to place class names based on the url with your id's. the class name can be generated from the request_uri (assuming the html code is in a view/template/include). example: <div id="container" class="contact_us"> then if you need tweaks to a specific page, just add #container.contact_us { foo: bar... }
• storborg 16y ago
  I have four core files: reset.css - I use eric meyer's elements.css - Global defaults for things like body, h1, h2, h3, p, a, input, strong. All or almost all selectors in here are just tag names. layout.css - Just sets up the global layout with containers: e.g. header, footer, left column, right column. blocks.css - Reusable chunks. In addition to that, I use a separate file for each "page type". For example, 'article.css', 'index.css', stuff like that. Some larger sites merit additional files like splitting off 'forms.css', 'tabular.css', etc. All files get concatenated and minified before serving, obviously.
  • AyKarsi 16y ago
    What would you put in chunks.css? Could you maybe provide a brief example?
    • kaylarose 16y ago
      I can't speak for the OP, but as I use a similar system I can venture a guess that some of the following might be worthy of chunk status... For a website: callouts, user quote styles, tables styles [zebra stripes, etc.], feature lists, intro paragraph styles, Flash/message styles, common control styles, etc.
  • keyle 16y ago
    That makes a lot of CSS files. Google chrome network optimization would tell you to reduce the amount of includes to speed up your site. That said that is debatable since it would be quickly cached.
    • thenduks 16y ago
      As he says at the end, one would obviously not just stick a big stack of `link`s in the page. Some kind of build system/asset packager would be necessary and desired (so you aren't forced to write a huge monolithic css file that no one but your past-self can navigate :)).
• PelCasandra 16y ago
  Use SASS with partials and mixins and sort them as it's more convenient for you (probably following the natural flow of descending order of your page).
  • bdclimber14 16y ago
    SASS has helped me with organization tremendously. With SASS I keep a "typography" partial that is the basic text elements (h1, p, etc.) and font-family variables. I also have a "colors" partial where I put variables for all my color definitions, such as $light-blue, $dark-gray, and $background-color.
• dfischer 16y ago
  I leverage SASS and Compass for Ruby heavily. I utilize mixins heavily so I can modulize all my styling and make sure it's included in areas that are appropriate. I've learned this is the only way to handle CSS without styles getting too complicated and accidentally changing something where you didn't mean to. Example (create a mixin that has certain styles for forms and then include it in a body.wizard page) this way I keep my CSS very dry. General coding guidelines are horizontal. I recently switched to this. I used to do vertical and indentation but it's very hard to read with big files. I've found that it's a lot easier to read horizontal CSS. I alpha all my styles from a-z.
• OstiaAntica 16y ago
  LESS CSS seems worth a look: http://lesscss.org/ http://lesscss.org/
• nvictor 16y ago
  i saw one guy's css once it it looks like: .wrapper { ... } .sidebar { ... } .content { ... } the indentation was well done.
  • deleted 16y ago
    [deleted]
  • datashaman 16y ago
    We had a GUI 'designer' who did the exact same thing to our whole site. Spent ages trying to get stuff to work... :)
• mikecomstock 16y ago
  Here's what I do: - Almost all CSS goes in 1 big file. One line per selector to keep thinks clean and easy to find. Styles from external sources (like jQuery UI) go in separate files. - Reset lines go at the top, if you use them, in a / RESET / section. - Styles for individual HTML tags are next in the / HTML TAGS / section. - Then a / UTILITY CLASSES / section for clearing floats, etc. - Next comes site layout. Headers, footers, page width, etc. all go here. Just the layout though - think the grid. No real content styling yet. - Now sections for each piece in the layout. Content styles go here. First a section for the / HEADER CONTENT /, then a big section for the / PAGE CONTENT / (vast majority of styles go here), then the / FOOTER CONTENT / styles.
• bdclimber14 16y ago
  The best suggestion I can give is to break up your CSS into multiple files. If you have a "projects" page, make a "projects" CSS file for style definitions specific to that page. I keep the overall layout elements together. I typically also have a "forms" CSS file just for buttons, form layouts, and inputs. Then @import everything in screen.css.
• simonw 16y ago
  Natalie Downe, my co-founder, has a very neat technique for organising CSS which she calls a CSS System. She described it in this talk: http://lanyrd.com/2008/barcamp-london-5/sg/ http://lanyrd.com/2008/barcamp-london-5/sg/ She splits everything in to general styles (basic HTML elements), helper styles (things like forms, notifications, icons), page structure (header, footer, layout columns etc), page components (reusable composable classes for components that occur on different pages in different combinations, such as a news teaser) and over-rides (special cases for individual pages, rarely used). She hardly ever uses IDs, preferring classes for almost everything - because CSS written against classes can be used more than once on a page. She uses CSSEdit's groups feature to make the CSS easier to navigate - it's all in one file. http://macrabbit.com/cssedit/ http://macrabbit.com/cssedit/ View the stylesheets on http://lanyrd.com/ http://lanyrd.com/ and follow the link at the top to the unminified version to see annotated examples.
  • dfischer 16y ago
    ID's are useful for unique element styling which will always be a case in a website. There's certain elements that are absolutely unique. Goes hand-in-hand with javascript to ease selector targeting. I never scope ID's either, that's the wrong way to do it. An ID is always unique so it is top-level.
    • simonw 16y ago
      The problem with absolutely unique elements is that, in a complex enough website (that evolves over time), they often end up not being unique after all. I agree about IDs for JavaScript though.
      • kinofcain 16y ago
        Exactly, as far as CSS is concerned an id is effectively equivalent to a class name except when it breaks things. Ids should be used only for scripts, and most of the time should be auto generated anyway.
        • 16y ago
• duopixel 16y ago
  After many years doing CSS my best workflow has come to this: reset.css //for resetting browsers grid.css //if I'm using a css framework global.css //styles that are shared across the site section.css //styles that pertain a specific section. The name of the file varies, i.e. "about.css". You need a good code editor that allows you to open files without tabbing or reaching for the mouse, I use Textmate's Command T to switch fast among my files. reset.css There's a bunch around, I use the one from htmlboilerplate.com, but there's many good ones available. (Eric Meyer's). You will almost never touch this file. grid.css I only use this occasionally, when I'm working on sites where the grid is very clear and I take out all the stuff I'm not going to use. I usually go for a three col version of 960.gs and trim it to about 12 lines of css. Never touch this. global.css Here you put your nav, your footer, you body styles, etc. I think that separating by colors and typography doesn't make sense, because you usually change a widget's appearance. section.css I count on the body tag having a classname, so I can have body class="about" and then do... .about section.photo {...} This way you never override your styles accidentally. Miscellaneous I avoid the one declaration per line convention when I have similar styles and I want to be able to read them in a table format, i.e. .available {background-color: #0f0;} .taken {background-color: #00f;} .deleted {background-color: #f00;} I usually start from the most generic to the more specific, but I don't worry too much about code order because in the end I just do a search and reach it in no time.
• 0p9 16y ago
  A good example of some super organized CSS is in the HTML5 Boilerplate by Paul Irish. Found here: https://github.com/paulirish/html5-boilerplate/blob/master/css/style.css https://github.com/paulirish/html5-boilerplate/blob/master/c... I sometimes use multiple instances of the same selector, especially if a project starts getting very big. I like to separate each function of the site into it's own block after the footer declarations. It lets me stay organized during development and ensures that I can keep track of what I'm working on while I'm working on it. Here's the order I'm currently using, which was inspired by the above: /* HTML STRUCTURE STYLES */ body { foo: bar; } h1 { foo: bar; } a { foo: bar; } /* Image Replacement & Hacks */ .ir { foo: bar; } /* Container Styles */ #header { foo: bar; } #main { foo: bar; } #footer { foo: bar; } .column { foo: bar; } .sidebar { foo: bar; } .img-cotainer { foo: bar; } /* Everything inside of #header */ .navigation { foo: bar; } #header li.nav { foo: bar; } /* Everything inside of #main */ .content { foo: bar; } /* Everything inside of #footer */ .social { foo: bar; } #footer li.nav { foo: bar; } /* Everything in specific view inside of a container from above */ .profile { foo: bar; } .comments { foo: bar; } /* Media Queries */ @media all and (orientation:portrait { * { foo: bar; } } /* Print Styles using Media Query */ @media print { * { foo: bar; } }
• kj12345 16y ago
  For me the biggest goal is fewer lines to organize in the first place rather than any particular scheme for grouping. What I do is: 1) Use as few separate stylesheets site-wide as possible so any contradicting or repetitive rules will be obvious. 2) Use one line per rule so I can scan the selectors quickly, then scroll horizontally if necessary 3) I prefer complex comma-separated selectors which set one or two properties to simple selectors which set many properties. Grouping in this way gets me closer to having constants, e.g. a specific hex color won't be rewritten again and again, it will just follow a complex selector list. 4) Once a selector works, I try to make it more general, e.g. "div.info { font-size: 12px }" can probably just be ".info { font-size: 12px }". More general rules will apply in more cases, so fewer overall rules will be necessary.
  • 0p9 16y ago
    2) Use one line per rule so I can scan the selectors quickly, then scroll horizontally if necessary I'm going to finally start turning off text wrap. You've opened my eyes to this. Thanks for sharing.
• trevelyan 16y ago
  On an MVC site, I organize by controller. There's one general file for generic cross-site stuff (header/footer, etc.), supplemented by another CSS file that shares the markup for all controller-specific pages. This gives a max of two css files per page. For the landing page I compress the generic file along with the controller-specific css file for the default page into a single file. This speeds up the loading process while preventing too much bloat. Since the other pages are usually hit after the landing page they require only a single extra download. Any reset code can be included in there as well, although maintained as a separate file. I doubt this approach is ideal when it comes to organizing things, but it's fairly fast when it comes to development. I design by including css in style="" and then refactoring the markup into classes once the design is complete. Saves a lot of back and forth while getting things lined up.
  • jkjeldgaard 16y ago
    I also organize styles by controller/action in my Rails projects. This trick from "The Rails 3 Way" is great for assigning the correct classes to the page: Using Haml: %body(class="#{controller.controller_name} #{controller.action_name}") Using Erb: <body class ='<%= "#{controller.controller_name} #{controller.action_name}"%>'>
• codejoust 16y ago
  I've really enjoyed SASS/SCSS optionally with Compass. It lets you compile the stylesheets while still keeping the source files separate and organized. I've also seen the approach with one big file for the application with commented sections, however, the drawback to that approach is using a version control system with multiple editors on a large file (merge conflicts, etc).
• fleitz 16y ago
  Start by using sass reset.sass 960gs.sass default.sass In default @include reset and 960gs (sass compiles it all into one css file) Then use a per page sass file that references default.sass If you want something pre-built that does all this use compass.
• peng 16y ago
  At some point, the amount of CSS complexity becomes best handled by a preprocessor. Stylus is great: http://learnboost.github.com/stylus/ http://learnboost.github.com/stylus/ I made a post about it, and personally prefer it to Sass and Less: http://nylira.com/stylus-the-revolutionary-successor-to-css/ http://nylira.com/stylus-the-revolutionary-successor-to-css/ The hardcore abbreviation mixins in my post seem to offend some coders. When you work in CSS and HTML hours every day though, every character saved adds up to a huge productivity boost. My current project has 30 directories with 73 partial Sass files, which compile down to one 320kb file. As to your question, I organize my partials based on controller and url structure.
  • erikpukinskis 16y ago
    My current project has 30 directories with 73 partial Sass files, which compile down to one 320kb file. Isn't that a lot to download? That's like 2 seconds on average to download that file in the U.S., and probably in the 10 seconds or higher range for a lot of folks. I guess if the download is delayed to after some kind of engagement (sign up, etc) it's not a big deal? Is 320K of CSS really necessary? (legitimately asking)
    • peng 16y ago
      320K is a lot, no question. This project hasn't been released to public yet, and there are areas to optimize. Keep in mind that this only 42k gzipped.
    • mattdawson 16y ago
      IMHO, it's not. I'm working on a few relatively complex web apps where the CSS download time don't come to anywhere near that size. In my world (mobile devices, in particular) 320k would be totally unacceptable. 100k is about the point where I start re-evaluating my design.
• ww520 16y ago
  I just use Blueprint.
• dillon 16y ago
  Lots of comments really help, especially when you look at it months after.
• utunga 16y ago
  Suprised no-one has mentioned Nicole Sullivan's (amongst others) Object Oriented CSS (OOCSS) project: https://github.com/stubbornella/oocss/wiki https://github.com/stubbornella/oocss/wiki She used this approach at Facebook (and Yahoo, I think?) to successfully tidy up a huge code base of thousands of CSS files down to a more manageable few. I attended her workshop at Webstock and since then had a chance to put it into practice on a 'get it up quick' green fields project (http://chchneeds.org.nz http://chchneeds.org.nz). I must say I was really pleasantly surprised at the way this approach just avoids a lot of the pain points, as a web developer/coder (ie not an html/css guru) I so often face when just getting the simplest things to 'work'. I guess the hardest thing for me to get my head around to was that to make things more modular you had to let go (a tiny bit) of being so religious about 'semantic html' as a requirement for the HTML, but I think its worth it to get your CSS a whole lot more modular and 'pluggable' together. Still a bit more work to do, IMHO, but I'm definitely going to be monitoring this project closely. Nicole Sullivan's site: http://www.stubbornella.org/content/ http://www.stubbornella.org/content/
  • ChrisFulstow 16y ago
    I'm really interested in the OOCSS approach, it's efficient, maintainable and modular, and although it's not perfectly semantic the trade-off is minimal. I first discovered it from the Velocity 2009 conference, and Nicole Sullivan's talk from Web Directions North - http://goo.gl/yLkby http://goo.gl/yLkby
• techiferous 16y ago
  I once tried breaking my css into files according to function (typography.css, color.css, layout.css). It ended up being a royal pain because when I added a new HTML element and I went to style it, I ended up having to duplicate the css selector for that element in three files. I also was constantly switching among the three files to work with one element's styles. So whatever you do, don't organize by function. :)
• mattberg 16y ago
  Ever since using Drupal's Zen theme I have preferred their basic setup for grouping CSS files. Here is a rough example: html-reset.css layout-fixed.css page-backgrounds.css messages.css pages.css blocks.css navigation.css comments.css forms.css fields.css print.css ie.css ie6.css Drupal's CSS optimization, once turned on, will roll all of these up for you automatically, so if you aren't using Drupal you will need some sort of build system to combine and minimize everything. But I think this is a good start. On a side note, I really like the method the Zen theme uses for CSS columns. Worth checking that out as well.
• zefhous 16y ago
  Ideally, I use Sass with Compass (http://compass-style.org/ http://compass-style.org/). This alone is a great start to keeping things organized. One of the things I love about Sass is that it allows partials and variable declarations, which both help immensely with code organization. Then, my code is usually organized as follows. Each section can be extracted to a partial if it gets long enough or if more separation is desired. Framework includes and resets Variable declarations — colors, possibly specific widths Universal method declarations Standard global tags — headings, p, a, ul, li, etc... Generic form styling, usually in a dedicated partial Layout — container, header, content, footer Then to specific section styling Since Sass uses indentation, I indent everything in each section within a top level tag. This really helps visually distinguish each section and gives a much less uniform look to the stylesheet which makes it a lot more scannable. If a section uses methods exclusively I'll declare them just above the top-level section tag. I'm pretty happy with this approach. It was formed fairly organically but become more defined as I use it for more projects. It also seems to work well for both large and small projects, since partials can be used when the code starts getting long.
  • nagash 16y ago
    The biggest problem that I have with Sass is that the file/line references in your developer tools point at the compiled CSS files, and so you don't have any real reference to where in your Sass files that style is defined. Any solution for this?
    • panpainter 16y ago
      There actually is; SASS has built-in functionality that will actually inject the source filename/line-number in to the generated CSS. Additionally, Nathan Weizenbaum (one of the HAML/SASS maintainers) released a Firefox/Firebug add-on that will read this and display it in Firebug like it does for traditional CSS. More on debug-mode: http://sass-lang.com/docs/yardoc/file.SASS_REFERENCE.html#debug_info-option http://sass-lang.com/docs/yardoc/file.SASS_REFERENCE.html#de... Grab the Firefox add-on here: https://addons.mozilla.org/en-US/firefox/addon/firesass-for-firebug/ https://addons.mozilla.org/en-US/firefox/addon/firesass-for-...
    • 16y ago
• findm 16y ago
  I think alot of it depends what it is that you are building. My approach to would be different if it were building a large scale web app vs a website and it also depends on the team thats helping to maintain it (ie. if it were to be maintained by engineers who don't really know or care for css or a team of web devs) I always start off with a base which consists of the misc. browser fixes and hacks + basic typography elements, rough blocking. My philosophy on formatting really follows what everyone here is saying. I really prefer horizontal lines and proper tabbing of all the sub elements because its really hard to read otherwise. While commenting is really good and I like it, finding the proper balance is the key. When you're doing fast iteration it gets really tedious and cumbersome to go back and make sure your comments are in sync. This is how i arrange my css: http://maderogue.com/public/assets/css/base.css http://maderogue.com/public/assets/css/base.css For bigger project I like to break things down by specific functions & models. (ie. tables, buttons, sorting controls, etc.) i really like the way jquery ui themes are done.
• andyford 16y ago
  Like many of the other commenters, I break the code into reset, global elements, layout, modules/blocks, and then special overrides if any. I'll admit it's a personal preference, but as a team consideration I don't recommend the 'all properties on one line' approach. It's discouraged in other languages so why do it in CSS? Definitely check out OOCSS as well as the Natalie Downe talk both posted by in the comments already. I can't overstate how highly I recommend Sass/SCSS. It's been mentioned already as "for Ruby". Yes, you need Ruby installed to use Sass/SCSS but you do not need to be working on a Ruby project to use it. You can run "sass --watch (directory name)" from the command line and sass will automatically compile your .scss (or .sass) files to .css files upon save. Even if you're scared of the command line I assure you, it's easy! If you're a TextMate user, there's also a great SCSS bundle here: https://github.com/kuroir/SCSS.tmbundle https://github.com/kuroir/SCSS.tmbundle (it was enough for me to abandon CSSEdit for good) One thing that hasn't been discussed in this thread yet is the organization of properties within a declaration block. It's a good idea to have an approach and stick with it. Alphabetizing the properties is one approach. I wrote about my preferred approach a couple years ago here: http://fordinteractive.com/2009/02/order-of-the-day-css-properties/ http://fordinteractive.com/2009/02/order-of-the-day-css-prop... (also check out the SitePoint discussion linked in the "Further Reading" section of the post)
• marcuswestin 16y ago
  I tend to build all my DOM in object oriented javascript, and always give the root element of a UI component the same class name as the name of the JavaScript class. See eg https://github.com/marcuswestin/Focus/blob/master/js/ui/panels/LeftPanel.js https://github.com/marcuswestin/Focus/blob/master/js/ui/pane.... The CSS selectors then mirror the structure of thr JavaScript files as well as the hierarchy of the resulting UI.
• bitsm 16y ago
  I can't recommend Compass/Sass highly enough. A CSS pre-processor will completely free you to organize your CSS however you want, and more importantly, it lets you build up a library of common components (forms, buttons, etc.) that you can easily reuse and adapt for new projects. Generally, these library files will simply contain mixins (reusable chunks of code), so they don't output anything directly into your CSS, but allow you to include the mixins in certain styles. Very useful for adding effects, rounded corners, etc. on different elements. Keep in mind however, that mixins can be overused, adding bloat to your code. CSS does cascade, after all. You should always look to see if you can separate reusable css rules to include in markup (commonly seen with grid systems). How you balance out the convenience of keeping your css flexible vs. not littering your markup with lots of styles really depends on the project, but it's something to think about. I have developed one very useful trick while using Sass for managing colors. Instead of assigning colors directly to an element (very hard to track down later if a change is necessary), I create color variables named after the element and attribute in question. Then in my colors.scss file, I build up my color palette, and after, list all the color variables I created in my stylesheets, setting their values to the appropriate color from the palette (with tweaks, if necessary). // in colors.scss --- // color palette $red: #ff0000; // assign colors to elements $body-background-color: $red; // in layout.css, for example --- body { background-color: $body-background-color; } Since Sass lends itself to lots of files, keeping all my colors and the elements they are assigned to together in one file makes them much easier to manage down the road.
  • jarin 16y ago
    I do this, but with a slight tweak: instead of naming the colors things like $red, I try to give them semantic names like $shadow, $highlight, etc. in case I end up having to pick a completely different color scheme.
    • isleyaardvark 16y ago
      Do both. If you pick a completely different color scheme, it's easier to change $highlight = $red to $highlight = $blue than to remember the hex values.
• pippy 16y ago
  ySlow recommends at most 3 stylesheets, and with good reason: the HTML headers and request times can drastically slow a site down. By simply organizing the structure of the file well, you can have a easy to navigate css file. Of course there may be a few extra style sheets; ie.css, section specific.css, print.css and mobile.css. Here's my CSS file structure: -reset -html tags h1,p,q etc -header -navigation -content -sidebar -misc (popups, forms, buttons) -footer
  • elliottkember 16y ago
    It's generally a good idea to concatenate your stylesheets for production - doesn't mean you have to write them as one big file, though.
• carbon8 16y ago
  I also use Sass and Compass. I generally organize the directory roughly like this for projects without a separate designer: stylesheets - ie.sass - master.sass patials - _base.sass - _forms.sass utilities - _custom_mixins.sass vendor - _facebox.scss The files with leading underscores are partials which are included in the master.sass. Note that facebox is an scss file. I just dump the CSS in it and include the partial in master. The nice thing about sass is that it you can change output format, so you can just include all the external CSS files as partials and automatically output a single compressed files with your entire CSS. When I work with a designer who uses CSS I use a structure like this: stylesheets - master.sass partials - _style.scss vendor - _facebox.sass In this case, the designer's CSS is dumped in the _style.scss partial, then included in master.sass. Then in master.sass I include my modifications to the designer stylesheets. That way I can leave the designer-provided CSS largely untouched and still have all the flexibility and power of Sass.
• Nimb0z 16y ago
  Just run it through ProCSSor (http://procssor.com http://procssor.com or http://css.tl http://css.tl). Lots of options.
  • carterdea 16y ago
    that's an amazing resource. thanks
• supervillain 16y ago
  Here's an example of a super organized CSS, with table-of-contents, https://www.mint.com/css/rd/mint.css https://www.mint.com/css/rd/mint.css
• Flam 16y ago
  How I do it: 1 File. Single line styling. Order: Reset, html/body, header, container, footer, misc (h1, p, span, input). Indent (ie: #header { } -newline+tab- #header p {}
• selvakarthi 16y ago
  Organizing the CSS is not a big matter, giving the correct name to the class and id will lead smart way to organize
• TorbjornLunde 16y ago
  Don't overcomplicate things: - Have only one CSS-file, unless your project is huge. - Never use IDs - Avoid reset CSS (espescially if you can ignore IE6/7 - If you think you need variables (like in SASS), you are probably thinking about it the wrong way - Give classes functional names, not presentational - Linebreaks after declaration. (Makes your CSS-file easier to navigate) - Remember that you can use you media queries inside your CSS-file Web designer Jens Meiert has some good articles: http://meiert.com/en/blog/20090401/why-css-needs-no-variables/ http://meiert.com/en/blog/20090401/why-css-needs-no-variable... http://meiert.com/en/blog/20080515/css-organization-and-efficiency/ http://meiert.com/en/blog/20080515/css-organization-and-effi... http://meiert.com/en/blog/20070321/css-practice-pseudo-namespaces-in-complex-projects/ http://meiert.com/en/blog/20070321/css-practice-pseudo-names... http://meiert.com/en/blog/20090527/css-maintenance-issue-1/ http://meiert.com/en/blog/20090527/css-maintenance-issue-1/
  • weallneedheroes 16y ago
    Never use IDs? Why? i'm open to this if you have a good argument but i use IDs for unique elements only.
    • evanrmurphy 16y ago
      The problem is that as a site grows, it's common for things that were once unique to become multiple. Also, if you just resolve to always use classes instead of ids, then you can eliminate the cognitive overhead that comes with every new selector of, "Should this be a class or an id?".
      • perlgeek 16y ago
        How many of your pages have two footers? I do agree on the cognitive load though.
    • TorbjornLunde 16y ago
      The main reason is that including IDs makes “selector points” much more complex. A selected with one ID will outweigh a selector with two classes for instance. This can quickly lead to complexity because you need to use a ID many places in order to override a selector that used ID. A class only used once serves the same purpose as ID (CSS-wise), expect that you avoid a lot of problems. I might use IDs for anchor purposes (site.com/foo#section), but I never reference it in my CSS.
• mixu 16y ago
  my rules: 1) Layout and widgets only. I start with a reset, then layout (block positioning), then widgets. Everything other than layout is a widget. There are no global styles. If there is one of it, it's an ID. If more, it's a class. 2) No (global) element styles! Ever! No, not even a p { margin: xyz } or a ul { list-style-type }. Every element that cannot be referred to by class / id must look exactly like it would after the reset. This avoids complex dependency chains where coincidence influences look. Widgets can be moved from one site to another and you actually have to think new widgets through rather than relying on the default values. 3) Avoid classes and id's as much as you can. Have single base element with a simple but descriptive class name, and then specify the sub-elements. For example: Instead of “div.content-title” use “#content h1″ (e.g. div#content with a h1 tag inside it). Basically, design widgets which consist of one base element, and refer to sub-elements via longer expressions. Use indentation to separate sub-elements. My strong preference is to maximize for human readability (=short dependency chains, descriptive widgets rather than single elements) rather than short CSS. Cascading within widget-scope is fine, but cascading with global styles should be avoided. I find that when I follow these rules, I like my CSS a lot more.
• 7oot 16y ago
  I use a single file for each type of media (screen, print ...). Each file has general styles first (HTML tags), IDs of layout boxes, classes to fine-tune formatting, and overrides at the bottom (if needed). I like to keep spacing for readability (maybe minify the files when I'm finished).
• monisninja 16y ago
  here's a simple way I organizate my CSS: 1. reset.css 2. global.css - reusable classes and styles for common selectors (html, body, a, etc) 3. css named per page (or type of a page) - ex. home.css / about.css / results.css / static.css * I usually add a class / id to the body and use that as my first selector on the page-level css. This allows me to combine all + minify for production
• weallneedheroes 16y ago
  not really sure every way suits all but if it's kept as clean as possible & organised it's always best. Personaly i keep everything to do with each area to gether ie. Header, footer, I wouldn't seperate out the <h> & tags & place all the 's together. if i'm working on a large site i tend to seperate out the css by section home, Base template (about for example), contact, blog, news, shop...
• evanrmurphy 16y ago
  Use tables for layout instead of CSS. Then your CSS will be more concise (essentially reduced to a theme) and less confusing (because CSS layout properties like float and position tend to cause the most confusion). Edit: Rephrased to try and better express the idea.
  • michaelsacca 16y ago
    joke?
    • evanrmurphy 16y ago
      Not a joke, though I realize it's an unpopular view. I also had trouble phrasing the idea in a way that didn't sound stupid.
• phenomenia 16y ago
  I write general styles like definitions for *, a, p, ul etc first and after that I put everything in DOM order if possible. Starting at the startpage of the website/project. Within the selectordefinitions I write general definitions like width, heigt, display-type and position (top/left.. margin, padding) first. Then contentspecific definitions like font definitions. At the end I write border and background definitions. That way it's an ease to see if an element hast a specific definitions, because I know if I'm looking for the width and the first definition is not the with then there is no width set for this element.
• evanrmurphy 16y ago
  Sometimes it's better to inline a style than to put it in a separate file. I think when you find yourself writing nested selectors that are heavily dependent on the HTML structure, it's an indication that your code could be less fragile if you just used the HTML style attribute instead.
• phenomenia 16y ago
  I write general styles like definitions for *, a, p, ul etc first and after that I put everithing in DOM order when possible. Starting at the startpage of the website/project. Within the selectordefinitions I write general definitions like width, heigt, displaytype and position (top/left.. margin, padding) first. Then contentspecific definitions like fontdefinitions. At the end I write border and background definitions. That way it's an ease to see if an element hast a specific definitions, because I know if I'm looking for the width and the first definition is not the with then there is no width set for this element.
• chaffneue 16y ago
  I lay my styles out in 1 file and I don't often comment them. Stylesheets cascade to much to pin them to a specific area of use - it's easier to debug them by clever naming still - sigh. IE specific files loaded after and only contain 1 or two tricky IE tweaks. Javascript /Jquery plugins sometimes come with their own stylesheets, and in those cases I'll leave them where I found them. For some of the bigger sites with very different looks and feels, I'll often have a boilerplate (reset to skeleton level) and each page or section will load in their own stylesheet. Just depends how big the site is. Order is: * Reset (only for early IE )-http://developer.yahoo.com/yui/reset/ http://developer.yahoo.com/yui/reset/ I find myself using it less and less * Global Styles - HTML tags - global font faces * Clearfix - http://www.webtoolkit.info/css-clearfix.html http://www.webtoolkit.info/css-clearfix.html * Skeleton/Structural Styles - grids/divs/columns * Headers/footers/persistent styles * Page specific styles and IDs * Conditionally load IE Styles if they're required * load javascript plugin css with the plugin's preferred dir if possible As for pipelining them, I usually just use a gzipped connection and still serve them individually, since internal image paths for backgrounds rely on the CSS path. CSS caches very nicely, so take advantage of it on the HTTP side. example: http://code.google.com/p/streeme/source/browse/trunk/web/css/player/desktop/stylesheet.css http://code.google.com/p/streeme/source/browse/trunk/web/css...
• Andaith 16y ago
  The system I came up with is A table of contents that makes it easy to jump to specific styles. First the global styles, then different things like Header, Navigation, Main Content, Right-hand-side-doodad, Widgets, Footer, etc. Then create a Table of contents at the top and give each section a unique identifier, FEDCBA-Head, FEDCBA-Nav, etc. Go down to each group and put in a comment saying "Start of Navigation CSS <FEDCBA-Nav>". Now you can look in the table of contents and do a quick file search on the unique identifier, and be taken right to the CSS you're looking for. I generally make the table of contents a lot more detailed, and it has an upkeep cost, but it's well worth it when the CSS file gets big.
• ricardobeat 16y ago
  Use less (http://lesscss.org/ http://lesscss.org/) - the JS version. Makes your code beautiful: no repetition, hierarchies, concise. Where I work we've used it for about 9 months now and there is no looking back.
• joelanman 16y ago
  I try to code CSS starting with generic, going down to specific Eg. Files would be something like: * reset * global (eg header/footer) * common (stuff used most places but not all, eg. forms) * specific to section of the site * specific to the page
• csbartus 16y ago
  Sorry guys, After reading all comments it seems there is no (universal) solution to write good HTML/CSS code. Not like in Ruby or Python or other programming languages. Since this year I'm struggling to create a post / best practices how to code front-end but the problem is too complex (for me). The biggest issue is how to mark up HTML to have a DRY (minimal) CSS. And how to remember easily these mark up rules to be able to maintain anytime in the future your CSS/HTML. If you would elaborate your naming / marking up best practices instead of suggesting frameworks/tools maybe that would help better.
  • kaylarose 16y ago
    1. Separate presentation from layout. For example, all common layout (margin, padding, display, positioning, floats) go in structure.css and color, border styles, background, etc. go in presentation.css. It is far more likely that you will be making presentation changes going forward rather than to your core layout. 2. Only use the minimal selectors you need: div#features ul.feature_list li.feature a{color:red;} could be DRYed up to be .feature_list .feature a{color:red;} which will be far easier to override later. 3. Avoid !important at all costs (sometimes you can't, but try). 4. This is personal taste, but I also usually avoid IDs for styling. 5. Grid frameworks (Blueprint, etc.) are usually overkill, but syntax frameworks (LESS CSS, Compass) are fantastic. It really boils down to experience, and knowing what you DON'T need - most people add in a ton of extra cruft and end up with hard to extend and debug spaghetti.
    • csbartus 16y ago
      Okay, let's see a simple example. I have a navigation list which I want to display horizontally as a menu bar. In plus I want to highlight the current element with jQuery. How to mark up this list? My immediate answer would be this: <ul id="navigation" class="inline-list"> <li><a href="">...</a></li> </ul> where .inline-list will transform this list to be displayed horizontally and #navigation will help to add jQuery on it. The rule for marking up in this case would be: * use #ID whenever you want to locate an element * use .class whenever you want to alter the display of an element from the standard Is that simple rule could be extended or made universal? That would be my question.
• stalemath 16y ago
  I usually include comments where necessary before a section, so in a file named global.css, I may have: /* header / .header { margin: 0 auto; padding: 0; width: 800px; } / body / .body { margin: 0 auto; padding: 10px; width: 800px; background-color: #fff; } / footer */ .footer { margin: 0 auto; padding: 10px; background-color: #EEE; border-top: 1px solid #BBB; } (this is just an example, assume the classes are for div's) If I have multiple CSS files, I may just call one (style.css) in the <head> of HTML document. Then within the style.css, I can just make a list of the documents using @import. ((by the way, this didn't come out the way I expected on here))
• halles 16y ago
  I use 4 stylesheets: - reset (duh) - layout (structural stuff) - typography (general typegraphic styles) - styles (stuff gets prettier than the already are). As for the grouping o selectors, i try not to reuse much code so cascading will not mess stuff up, i'd rather make big css than fragile css. I also try to group code on a per section basis… just remember i do have a typography stylesheet which makes most of the stuff readable and pretty before the glitz rolls in.
• dools 16y ago
  My colleague @camslizzle just put out http://stacklayout.com/ http://stacklayout.com/ - it's pretty new but it has a lot of promise I think and has received some favourable comments around twitter and here on reddit: http://www.reddit.com/r/web_design/comments/g3p9d/introducing_stacklayout_a_flexible_width/ http://www.reddit.com/r/web_design/comments/g3p9d/introducin...
• andraganescu 16y ago
  http://andreidraganescu.info/blog/1 http://andreidraganescu.info/blog/1 I use this system for about 4 years and am still delighted on how easy it comes to me. In brief: - Split up your style sheet according to rule types. - There are three main rule types that help when split: grid, decorations and fonts.
• wordchute 16y ago
  I typically generate css with php, usually in the header but sometimes in a linked file. Using this method I can easily alter site wide color or fonts, etc or feed the style atrributes from a database. This method also allows me to create blocks of css for different page elements and include them as needed - forms, menus, etc - or dynamically include definitions when conditions are met. This offers a lot of flexibility in terms of organizing and making changes to the css.