I've spent the last couple of years working on an edge multicamera system (drones). Even at a fairly low resolution, eg a 2MP RGB cam and a VGA thermal, you run

I've spent the last couple of years working on an edge multicamera system (drones). Even at a fairly low resolution, eg a 2MP RGB cam and a VGA thermal, you run into problems. Depends somewhat on how much cash you have to spend on the project! From experience, IO and encode speed are by far the biggest problem in these systems. You can do reasonably fast inference using a hardware accelerator on any platform - Google Coral is very efficient, as is the Intel NCS. For many ML applications, inference latency will dominate your framerate (ie it doesn't matter if you run it off a Pi, as long as you use USB3). But again, there your bottleneck is how fast you can feed the accelerator. Until recently, with more platforms offering USB3, actually saving data was a challenge. USB2 just isn't fast enough for high bandwidth multi-camera video and you quickly hit the write buffer on cheap USB storage. Forget SD cards unless you have low level access. Nowadays you can at least use an external USB3 SSD or even M.2 on some of these boards. In the past I resorted to tricks like buffering frames into RAM and then dumping to the card in one go to avoid doing random writes. Very few other platforms in this price range can offer encode specs like the Jetson. The Pi can do one h264 stream which is representative. The RK3399 can also do one stream at 1080p/30 - though I've never managed to make it work better than 15. A reasonable solution, actually, is to buy a Pi for each camera and hardware synchronize them (or not, if it's not important). Then camera support, if you go CSI then usually this stuff is pipelined into the ISP. If it's a UVC camera or whatever then usually you're going to be using Gstreamer. If the board claims to support N streams, that should all be done over CSI totally on the GPU without any significant CPU load. I'm not sure if that's what you're after, since you ask for CPU benches, but none of these platforms can cope with even a couple of HD streams on CPU only. You need hardware encoding. Processing is not saving though. You may be able to process video using CPU only, but if you want to do something with it later, you'll need to encode and transmit or store it. The downside is there aren't that many CSI cameras available off the shelf and they can be pricey, for no real reason other than economy of scale.