5 ms·
> The problem is that this can make it really hard to interrupt (people will literally not hear you) This is driving me crazy with Google Meet in these COVID19
by the_af 6y ago
> The problem is that this can make it really hard to interrupt (people will literally not hear you)
This is driving me crazy with Google Meet in these COVID19 times. Even in a relatively small conference, I have a really hard time interrupting someone to ask a quick question, even when the speaker is expecting interruptions. It's always "excuse me!"; delay as person continues speaking; I stop; the other person says "yes, please ask away"; when I restart my question the other person already assumed I've changed my mind and continues speaking; repeat ad infinitum. And this is if they even hear me over the audio breaking up.
It's very, very frustrating. If they solve this it would hugely improve quality of life in remote conferencing for me.
- jmole 6y agoThe biggest reason for this is people not using headsets. If someone is just using their laptop speakers and mic, Meet will prioritize the mic if they're talking and will duck any audio that comes through the speakers.
- znpy 6y agoI have headsets and tried pretty much everything. there's always background noise from me. I'm even using the audio cable with my bluetooth (!) headsets, turning bluetooth off. I don't know what else I can do.
- rob-olmos 6y agoI use a Plantronics Legend bluetooth headset, which is pretty good at cutting out background noise. Tested with a phone. Cheaper bluetooth headsets seem to pick up everything around them. Had that issue with a coworker where the headset was worse than using the internal mic. Biggest and annoying issue though is consistent bluetooth disconnect/reconnect issues even on different MacOS machines. Latest firmware and such. Pretty sure it's not 2.4ghz interference.
- gxqoz 6y agoI've heard that the original Bluetooth standard is pretty terrible for audio, especially for microphones. On Windows PCs at least, old protocols can cause a bad experience: "Modern high-end Bluetooth headsets support AptX, an audio codec compression scheme that offers better sound quality. But AptX is only enabled if it’s supported on both the transmitter and receiver. When using a Bluetooth headset with a PC, it only works if your PC’s hardware and drivers are compatible." (https://www.howtogeek.com/354321/why-bluetooth-headsets-are-terrible-on-windows-pcs/ https://www.howtogeek.com/354321/why-bluetooth-headsets-are-...) Not sure if this applies to a Mac though.
- cosmie 6y agoIt doesn't directly fix the disconnect/reconnect issue you're talking about, but I've found ToothFairy[1] super useful to mitigate the bulk of my MacOS bluetooth frustrations. A few different ways it's come in handy for me: - The Bluetooth speaker I use for music has a tendency to sporadically sound super hollow. Turns out it has a mic built in, and the voodoo of Mac's bluetooth stack would decide at random when it connected whether it would go into audio-only mode (and use the higher-bandwidth AAC codec) or go into audio+mic mode (splits the available bandwidth between the two and as a result uses a lower bitrate audio codec to compensate for the bandwidth drop). Used ToothFairy to always force that device into audio-only mode. - After the above discovery, tested doing the same with my actual headset, and leveraging the built-in mic for input. For call audio, it's pretty erratic on whether it'll have any impact at all, and depends heavily on the circumstances of the call itself. Sometimes the audio is massively better, but most of the time the audio is already degraded when it gets to my machine and the bluetooth improvement is moot. That said, makes music in between calls far more pleasant. - My bluetooth mouse is particularly susceptible to that consistent disconnect/reconnect issue you mentioned. ToothFairy can create a menubar icon for individual devices, which helps to act as a quick sanity check to see if my mouse has disconnected. ToothFairy can also run a shell script on disconnect, which has been handy. At this point I have it trigger a system notification[2] so I'm at least immediately made aware of it, check my idle time[3] in case it was the mouse going into sleep mode from inactivity, then conditionally leverage blueutil[4] to look for the device and reconnect if found (forcefully restarting the bluetooth stack in the process if it has issues). Doesn't fix whatever the root cause is for that consistent disconnect/reconnect issue, but this duct tape re-establishes a connection far more quickly when it happens, making the issue itself significantly less disruptive. I only stumbled on it via Setapp[1] and tried it on a whim, but it's definitely one of the more handy utility apps I've found and well worth the $5 App Store price for anyone that has similar bluetooth frustrations with their Mac. [1] https://c-command.com/toothfairy/ https://c-command.com/toothfairy/ [2] https://code-maven.com/display-notification-from-the-mac-command-line https://code-maven.com/display-notification-from-the-mac-com... [3] https://stackoverflow.com/a/17966890 https://stackoverflow.com/a/17966890 [4] https://github.com/toy/blueutil https://github.com/toy/blueutil [5] https://setapp.com/apps/toothfairy https://setapp.com/apps/toothfairy
- rectang 6y agoThere can still be background noise, but if you're wearing a headset there is not a feedback loop where noise from the other participants gets looped through your mic and speakers. Participants often don't realize that they're the culprit when somebody else sounds terrible.
- mleonhard 6y agoThe software could require everyone to do a mic check before joining the meeting. It would record a second of them saying "hello" and play it back to them.
- NullPrefix 6y agoThis would kill the product instantly. People don't like being reminded what their voice sounds like.
- cellularmitosis 6y agoSo much this. I'm almost at the point of stating that echo cancellation has done more harm than good, because we are now in a situation where 80% of people have no idea that wearing earbuds could make a tremendous difference in call quality, and everyone just expects the software to magically take care of it. Sadly, the software does not just magically take care of it. Anytime two people talk, a typical echo canceler just starts decimating frequencies until both of them are unintelligible. Add in a couple of clueless teams who mount a camera/mic against a conference room wall and introduce massive amounts of room echo into the mix, and I'm at the point where a conference call becomes an absolutely mentally exhausting experience just trying to decipher what is being said. I have no hope of contributing, because I can only hear 2/3 of the syllables, and my brain is running on overdrive trying to turn those back into words. By the time I've figured out what they just said, they're half-way into the next sentence. What a stressful hellscape. Ironically, if we had no echo cancellation, it would force everyone to use ear buds, and the average call quality would be a lot better.
- jonpurdy 6y ago100%. I wrote a post about this (among other basic tweaks) a couple of months ago: http://jonpurdy.com/2020/03/how-to-improve-your-zoomskype-teleconferencing-game/ http://jonpurdy.com/2020/03/how-to-improve-your-zoomskype-te... I have some screenshots of waveforms showing laptop mic vs headset, and the signal-to-noise ratio with the headset destroys even good noise-cancelling using a laptop mic that's farther away from one's mouth.
- closeparen 6y agoI always feel this with Zoom. Interestingly it did not seem to be an issue on a recent Discord call.
- kenhwang 6y agoDiscord targets gaming which absolutely prioritizes low-latency. Zoom has a very noticeable amount of latency which makes it really awkward to have multiple people talking at the same time.
- closeparen 6y agoIs Zoom picking some other point on an optimization curve, and if so, what's more important to it? Or is it just worse?
- kenhwang 6y agoZoom seems to be optimizing for bandwidth use, and by extension, cost to them. Its typical use case is a shared office internet connection. Discord users are more likely to have a dedicated fast internet connection and doesn't seem to care about profitability at the moment. It's just the difference in designing for a 100/10 connection to yourself vs sharing a 100/100 connection with 20 other people. Zoom reasonably gracefully degrades on choppy/slow connections while Discord becomes straight up unusable.
- closeparen 6y agoAh, this makes sense. I have noticed that Zoom never quite gives up for participants on slow / bursty networks. When something becomes that bad I expect it to be headed towards failure, but Zoom is happy to just sit there at 0.5fps.
- matsemann 6y agoWe're trying karaoke through Zoom tomorrow as a standup gag, wonder how that will work with the delay haha.
- crazygringo 6y agoIf the speaker did hear you interrupt, then that's actually a latency issue, not a noise/mixing issue. When a conference call is made up of people all in the same city on decent internet connections, latency is usually not a big issue. But when a conference call has people from New York, San Francisco, and Japan on it, even if it's only 3 participants, latency can be bad just because of the speed of light, essentially (on top of what is otherwise reasonable hardware/software latency). Latency may be bad even if you're talking with a colleague in the same city, since the audio is "mixed" on the server, and that server might be across the world if a participant from across the world started the meeting. (Counterintuitively, the latency with your local colleague could be twice as bad as with the colleague from across the world.)
- the_af 6y agoYou're probably right! Though I've just experienced this issue with three participants, all in the same city (not in the US though). It's really annoying.
- blackoil 6y agoYou can check your WiFi and try with an ethernet cable. Wifi has tendency to add unpredictable latency.
- dddddaviddddd 6y agoThis applies to everyone on the call
- avianlyric 6y agoI’ve experienced some pretty horrific latency in Google Meet that seemed to originate from my local device, where only my connection would suffer from high latency. Typical restart-all-the-things usually made it go away. But it wasn’t unusual for 500ms of latency to slowly build up during a 30min call. Unfortunately I have nothing more useful to add, the issue resolved itself before I could track down a definitive cause.
- bentcorner 6y agoI think part of the problem is that the tooling and the societal norms still need to evolve. The tooling is getting there - Zoom/Teams (I don't know about Meets) have buttons to communicate out-of-band beyond just text chat. We need to have more of that, I imagine eventually we'll have a wide range of ways to express ourselves (and customs/norms to match). Although I don't know if that'll happen before most people stop working from home.
- jfim 6y ago> Even in a relatively small conference, I have a really hard time interrupting someone to ask a quick question, even when the speaker is expecting interruptions. It's always "excuse me!"; delay as person continues speaking; I stop; the other person says "yes, please ask away"; when I restart my question the other person already assumed I've changed my mind and continues speaking; repeat ad infinitum. One way to solve this is to have the speaker name the person, and then wait until that person speaks. For example, if someone interrupts: Speaker: [Talks] Person A: Excuse me! Speaker: Yes, Mr. A? [waits] Person A: What about X? Or if there are two people talking at the same time Speaker: [Talks] Person A and B: Excuse me! Speaker: Yes, Mr. A? Mr. B, I'll come back to you after A. [waits] Person A: What about X? Speaker: [Talk about X]. Mr B, you were saying? Person B: What about Y? Treat it as a synchronization problem, with the speaker breaking the ties. As long as it's obvious to everyone whose turn it is to speak, it works well (assuming people aren't too rowdy/impolite).
- fossuser 6y agoYeah, I wish there was a simple non-verbal option to signal intent-to-talk. I want to just be able to hit my self-view and have it have a big icon on it or something so the person currently speaking (and everyone else) can see that I want to say something. Maybe sort these in chronological order so the speaker can see who wanted to talk first?). In theory you could do this with a good chat, but for some reason the chat in Zoom and the others is kind of an afterthought and nobody uses it. One of the reasons I prefer text based chat is multiple people can talk at the same time without needing to deal with interrupting audio. If you can type well, the bandwidth is higher for group communication (and you get a log). At least with video you can kind of tell when someone is waiting to speak by seeing their expression. Audio only is worse (but maybe wouldn't be, if you had good intent-to-speak tools built into the app?)
- boogies 6y agoI really like how Jitsi Meet puts the hand raising/lowering button right on the bottom bar, where there's just empty black/white space in Zoom/Google Meet, and not buried inside a menu labeled "Participants" (???), where it's a hassle to access (Zoom).
- llampx 6y agoMicrosoft Teams has a "raise your hand" function that's pretty handy.
- erichurkman 6y agoWe rolled out https://chrome.google.com/webstore/detail/nod-reactions-for-google/oikgofeboedgfkaacpfepbfmgdalabej https://chrome.google.com/webstore/detail/nod-reactions-for-... to all of our devices. The quick 'raise hand' button is great for what you're looking for.
- ghaff 6y ago>At least with video you can kind of tell when someone is waiting to speak by seeing their expression. Audio only is worse (but maybe wouldn't be, if you had good intent-to-speak tools built into the app?) Which is one good reason to use video. At least with smaller meetings, someone can raise their hand or just look really pained. (Bigger meetings, you probably need to use chat.)
- kaitai 6y agoI meet regularly with 2 people in the same room in one city, and me and one other person in the same room in another city (4 people, 2 locations). Google Meet is unfortunately entirely unusable for this purpose. It will select one person to "listen" to and tune out the person with the higher voice (that's me!). We have switched to Zoom for these meetings, as the only way to overcome this in Meet is to physically arrange for the higher-voiced people to sit immediately adjacent to a microphone -- while Zoom just works, most of the time.
- skybrian 6y agoSome folks find that switching from WiFi to Ethernet for your home office can help: https://www.jefftk.com/p/ethernet-is-worth-it-for-video-calls https://www.jefftk.com/p/ethernet-is-worth-it-for-video-call...
- bdamm 6y ago100% agree. Latency is a killer to natural conversation so if you want to be your best on a conference call, no Wi-Fi and no Bluetooth.
- Darkphibre 6y agoI rolled my eyes at first, because the only client on my network was my streaming laptop. Then I realized I'd moved to an apartment complex. I did a wifi scan, and found over fifty competing SSIDs. Switched to ethernet, and the improvement was night and day.
- db48x 6y agoIt's easy to forget that only one wireless device on a channel can send at any given time, even if they're on different networks. And that every channel overlaps with its neighbors.
- 01100011 6y agoIt would be nice if there was a 'raise your hand' button which put you in a queue to speak. Even better if it let you take a quick note in case you forget what you wanted to say.
- foxtr0t 6y agoThat sounds like network latency, not an issue with switching audio sources.
- the_af 6y agoVery likely. But for whatever reason, it results in very frustrating meetings. Like someone else mentioned, Discord seems to work better -- even though it's not the same use case, and I use Discord with friends and much later during the day.
- rossjudson 6y agoWell, you think they're expecting interruptions. ;) Maybe the existing Meet is good for you.
- the_af 6y agoI know they are expecting interruptions because sometimes (as in the particular example that triggered my frustration) they said so at the beginning: "please interrupt me every time you have a question, otherwise I'll feel like I'm speaking into the void and this will be a very boring meeting". The problem is that Google Meet (or my connection, or whatever technical reason) wasn't up to the task. This has happened enough times that I dread interrupting now. Sadly, one person monologuing is not how face-to-face meetings really work.
- captainbland 6y agoVery true. At the moment the best workaround seems to be Microsoft Teams allowing you to "put your hand up" through a button press so that the speaker can give way to you, but this is far from intuitive/comfortable for most people compared to how they'd normally interact.
- pault 6y agoEven in on location meetings I ask people not to interrupt and raise their hands instead. Otherwise a few socially inept people keep interrupting to ask questions or bring up criticism that the speaker would have addressed of they had been allowed to keep talking.