3 ms·
> ideally for RAID setups to work well the drives should be as close in spec as possible (ideally, the same drives). Everything I've read says this is a bad id
by Izkata 6y ago
> ideally for RAID setups to work well the drives should be as close in spec as possible (ideally, the same drives).
Everything I've read says this is a bad idea, because it's much more likely they'd die at the same time...
- pessimizer 6y agoSame drives, good; same batch, bad.
- funnybeam 6y agoYou want the same model but make sure they are from different batches. When buying SANs the vendor will routinely mix the disks supplied to minimise the chance of any manufacturing defects taking out multiple drivers at once
- to11mtm 6y agoYeah I should have been more specific there. For RAID you probably don't want the exact same batch for all drives, accident waiting to happen. Now CD/DVD-Burners on the other hand, if you ever want to run 4 of those at once, at the shop we found your best bet was to get sequential serial numbers, back then even a firmware rev could make a multi-burner setup squirrely. But I suppose that's a different form of Array...