3 ms·
You grind a mirror by hand by taking two glass discs, and rubbing one against the other with a slurry made of abrasive grit and water between them, with the len
by tzs 7y ago
You grind a mirror by hand by taking two glass discs, and rubbing one against the other with a slurry made of abrasive grit and water between them, with the length and direction of your strokes determining which disc becomes your concave mirror.
You start with large grit and work down to smaller grits as you get closer and closer to the desired final mirror curve. The large grits seem unlikely to become aerosolized during this. The finer grits are pretty small (a few microns) so probably could become suspended in air but because you grind wet, not dry, this probably isn't likely. Just work in a place with good air circulation and it should be OK.
There's also the glass particles that get removed to consider. I'd expect that they just end up in the abrasive slurry.
This all assumes you are hand grinding. If you use some kind of power tool that goes a lot faster than the sedate processes that is hand grinding, all bets are off.
There might be other ways things could get in the air. You can deal with all of that by wearing a respirator like you would for painting or sanding (once they become available again...).
- londons_explore 7y agoIf I were giving this to my child to do, I would give the child gloves, instruct them not to eat the slurry, and make sure they wash everything each day. If they break any of the rules, the health risks are minor.
- AstralStorm 7y agoWell, to remove the final risk you can wear glasses and a dust mask.