3 ms·
> and then you need to spend 50-100€ to just get boot graphics even though the machine will be headless 99% of the time. Buy a serial-over-USB patch cable; con
by derefr 7y ago
> and then you need to spend 50-100€ to just get boot graphics even though the machine will be headless 99% of the time.
Buy a serial-over-USB patch cable; connect it from the NAS to your laptop; open an STTY emulator on the laptop. No boot graphics needed.
- toast0 7y agoStill need something for boot graphics for the BIOS, unless non-server motherboards are coming with serial redirection default enabled and nobody mentioned it.
- kllrnohj 7y agoSet it up with a temporary card and then yank it out after it's setup. You don't tend to access the BIOS that much.
- ciupicri 7y agoI wonder if it's possible to set up the UEFI firmware by setting some EFI variables from the operating system for example by running efivar [1]. [1]: https://github.com/rhboot/efivar https://github.com/rhboot/efivar
- derefr 7y agoI mean, why not use a server motherboard (i.e. one supporting AMT; not necessarily one that requires RDIMMs) if you're building a NAS? NASes are servers in terms of their workload. Take advantages of the features designed for server customers.
- pedrocr 7y agoAvailability and cost naturally. A big part of the appeal here is the low price point for a great spec bare-bones home server using these consumer parts.
- toast0 7y agoMostly cost. The board itself, but also server boards are often hard to find for desktop sockets, so that drives cost for the CPU as well. But, if I get a server board, maybe I'm going to get one with IPMI, and those usually have serial consoles and some limited VGA for KVM over IP too. I could afford a $800 server project, but I'd rather spend $300.
- pedrocr 7y agoHad no idea that would even boot. I prefer being able to just plug in a monitor but that's an interesting option.