4 ms·
Apologies for a tangential side-topic: I wasted 6h of research trying to find a small machine with R1606G (or any of the V1000's) with dual 10GbE NICs, and fai
by pdimitar 7y ago
Apologies for a tangential side-topic:
I wasted 6h of research trying to find a small machine with R1606G (or any of the V1000's) with dual 10GbE NICs, and failed. :(
Even Sapphire who promised such a machine retracted their pages and now only their dual 1GbE NIC offering are being sold[0]. The dual 10GbE NIC variants only exist in two PDFs[1][2] now.
I went through AMD's official list[3] of embedded offerings based on the latest R1000/V1000 platforms but exactly zero of the options have the promised dual 10GbE NICs.
Can somebody point me in the right direction? I need a strong and power-efficient embedded NAS with 1 or 2 10GbE NICs that covers several other homelab/server needs and I feel the R1606G is the best compromise in terms of money, power, wattage expense, form factor and required cooling (ideally I'd keep that thing in my bedroom or living room and want to never hear its fans but hey, it can sit in a closet as well).
I am willing to look elsewhere, it's just that the latest R1000/V1000 offerings seem to be so good!
[0] https://www.sapphiretech.com/en/commercial/ipc-fp5v-1ge https://www.sapphiretech.com/en/commercial/ipc-fp5v-1ge
[1] https://www.sapphiretech.com/-/media/sites/sapphire/product/embedded/ipc_5p5v_1gbe/sapphireipcfp5vembeddedminiitxplatformdatasheetembeddedworld18f.ashx?v=afd503b2ff8444d8ac1449b4fe70c080 https://www.sapphiretech.com/-/media/sites/sapphire/product/...
[2] https://www.sapphiretech.com/-/media/sites/sapphire/product/embedded/ipc_fp5v/sapphire_ipc_fp5r_embedded_mini_itx_platform_datasheet_27mar19.ashx https://www.sapphiretech.com/-/media/sites/sapphire/product/...
[3] https://www.amd.com/en/products/embedded-minipc-solutions https://www.amd.com/en/products/embedded-minipc-solutions
- justinclift 7y agoWould it be feasible to get a motherboard with a PCIe v8 slot and throw in a cheap low power 10/40/etc GbE card? eg [0] [0] https://www.ebay.com/itm/Mellanox-ConnectX-3-QDR-QSFP-InfiniBand-CX354A-MCX354A-QCAT/164130634238 https://www.ebay.com/itm/Mellanox-ConnectX-3-QDR-QSFP-Infini...
- pdimitar 7y agoI don't know. It probably is but I never assembled an embedded machine and I hear there's a lot I could do wrong and just let the hardware fry.
- justinclift 7y agoHmmm, how about the Gen 10 HP Microserver? https://www.servethehome.com/hpe-proliant-microserver-gen10-review https://www.servethehome.com/hpe-proliant-microserver-gen10-... Depending on how many hdd's you're trying to use, it might be the go. Low power (energy use wise), but decent cpu, already assembled, etc. It's not as small as a NUC, but the older generation one I have here is about 1ft x 1ft x 1ft (easily fits on a shelf, under desk, etc), and is pretty much silent.
- pdimitar 7y agoThat is actually an amazing recommendation. I don't mind it being small or large that much to be honest -- I would prioritise it being [almost] silent. And I don't think I'd need more than 4x 12TB disks for a few years. Do you use yours as a NAS + media server? That's what I plan to use mine for.
- justinclift 7y agoMine is only really used as a NAS (file serving of smb/cifs mostly), not as a media server. It runs FreeNAS (works "out of the box"), which does have media server capabilities and many people apparently use them. I just have no real need for media server stuff personally. :) https://www.freenas.org/download-freenas-release/ https://www.freenas.org/download-freenas-release/
- pdimitar 7y agoThanks a lot. This gives me a good starting point. Appreciate it.
- justinclift 7y agoYou're welcome. :)
- paulmd 7y agoThe Asrock Rack X470D4U is pretty nice, and there is a variant with onboard dual 10GbE (X470D4U2-2T) albeit only 6 onboard SATA ports and loses the middle x4 slot. The base X470D4U also has the middle slot attached to the "NVMe lanes" (rather than fed from the chipset like normal) so it actually has 20 CPU-direct lanes. If you put a Noctua L9a on it, anything will be silent (although you may need to set fans manually on a server board, or use the included "low noise adapter" to drop the fan speed). That plus a 3600 (or maybe a 3100/3300X if you can source one yet) would be a good little NAS build. Has IPMI, which is nice if you will be running headless. Or if you don't care about IPMI (if it's not going to be running headless) then you can use pretty much whatever mITX/mATX board you want.