4 ms·
Repository for Open Source Mouse Firmware and Hardware
- SeanFerree 7y agoVery cool!
- RedBeetDeadpool 7y agoSweet! now I can finally make my vertical mouse + numpad + modifiers + thumb scrollwheel + lasers.
- fireattack 7y agoSearching "ADNS2026" results in this page and this page only. His link to SparkFun is "ADNS2620". Typo? Also, his photo reads "ADNS2016"..
- millette 7y agoI noticed the same https://github.com/biomurph/Mouse/issues/6 https://github.com/biomurph/Mouse/issues/6
- roland35 7y agoADNS-2620 does seem to be an obsolete part on digikey: https://www.digikey.com/product-detail/en/broadcom-limited/ADNS-2620/516-2238-5-ND/705066 https://www.digikey.com/product-detail/en/broadcom-limited/A...
- SparkyMcUnicorn 7y agoEven though it's mostly frivolous for a mouse... I've gotten myself into the QMK world, and was recently thinking about the possibility of something like this. My thought was to start with a atmega32 or something. Might venture down that path when I get a free weekend or two now that I have access to a 3d printer.
- leovander 7y agoSee my separate comment about QMK and the ploopy.
- Futurologist 7y agoI'm the hacker behind the Open Source Mouse Repo. I still have some ADNS2620 sensors in my stash (yes, that was a typo that is now fixed). Look into the readme and see that there is a company called PixArt that seems to be the only source for some of these parts. I did get a bite (mouse bite?) from their rep at the time of the OSHWA Summit 2 years ago, but they went crickets. This project could get resurrected if there is a replacement sensor chip. I kind of like the Arduino Leonardo + ADNS sensor, and not interested in just a breakout of an 'all in one' mouse sensor. If yer interested in getting a full kit or an ADNS sensor, please comment on the github issue tab https://github.com/biomurph/Mouse/issues/7 https://github.com/biomurph/Mouse/issues/7
- milton35 7y agoIt's not just "a company". Avago sold the IP to Pixart (after a long protracted patent battle) and exited the sensor market. Now all old Avago models are manufactured by Pixart.
- zargon 7y agoAvago's datasheets were thorough and easy to understand. Pixart datasheets, if you can find one, are incomplete and full of grammatical non-sequiturs and ambiguities. I really miss Avago.
- fit2rule 7y agoSeems like the logical next step is that we'll see a lot of slickly machined cases...
- leovander 7y agoMost likely 3d printed.
- swimfar 7y agoHere's another really cool DIY mouse project: https://hackaday.io/project/171196-rx-modulus-completely-modular-mouse https://hackaday.io/project/171196-rx-modulus-completely-mod...
- leovander 7y agoYou can order a ploopy[0] kit or modify their source[1]. I think a few users on r/trackballs[2] might have gotten QMK to work with it. [0] https://www.ploopy.co/ https://www.ploopy.co/ [1] https://github.com/ploopyco/mouse https://github.com/ploopyco/mouse [2] https://www.reddit.com/r/Trackballs/comments/dk4ha7/ploopy_vs_elecom_huge_now_with_qmk/f4ahzy3/ https://www.reddit.com/r/Trackballs/comments/dk4ha7/ploopy_v...
- microcolonel 7y agoI've been wanting to try retrofitting new guts for my Kensington SlimBlade trackball, particularly making it poll and process at 1000Hz rather than 125, since now all of my monitors refresh faster than it does. I've switched to a Logitech G Pro primarily because of the marked difference in responsiveness. The one thing that might be difficult is doing the scroll detection, since the SlimBlade produces scroll events when you rotate the ball about the vertical axis. Maybe I could get one of those kendryte thingies to do realtime inferencing on a model to discriminate scrolling from pointing.