6 ms·
It's cheaper to reuse the same USB 1.0 controller chip than update. That's it, the dirty secret. Some keyboards also do that to support OSes that have broken H
by p_l 7y ago
It's cheaper to reuse the same USB 1.0 controller chip than update. That's it, the dirty secret.
Some keyboards also do that to support OSes that have broken HID drivers, like Mac.
- Alupis 7y ago> It's cheaper to reuse the same USB 1.0 controller chip than update. That's it, the dirty secret. How can this be for high end gaming keyboards that retail for $150-$200 or more?
- mschuster91 7y agoThe only thing "high end" in there are the switches, and even that not necessarily.
- DiabloD3 7y agoBelieve it or not, there is a very small number of keyboards that use custom USB 3.0 controllers purely for isosynchronous mode, to get "PS/2 port interrupt"-like behavior. However, if you have a modern USB 2.0 "gaming keyboard controller" polling at 1000ms, who cares. Job done, go home.
- rasz 7y agoDo you mean Endpoint Ready (ERDY)? That is only available for non-isochronous endpoints.
- monocasa 7y agoNo, I think they're just constantly streaming out updates over a custom isochronous endpoint so the driver doesn't have to go out and request it at all like you do even with ERDY.
- rasz 7y agoWouldnt that swamp CPU with interrupts?
- monocasa 7y agoI mean, as much as a USB microphone does. That'd be isochronous too, and about the same bitrate and latency.
- amluto 7y agoThat would be awful for a keyboard. With sound, either the CPU wakes up to process sound very frequently or it processed sound in big chunks with high latency. Neither choice is reasonable for a keyboard.
- monocasa 7y agoIf you're the kind of person that gets that keyboard, you don't really care about power consumption on your CPU. Handling it as it's streamed in really isn't that big of a deal. It's not even like sound where you'd be doing a bunch of DSP on it right after.
- CarVac 7y agoMore margins make for more profit. It's always good to reduce costs regardless of how much you charge.
- Alupis 7y agoThere's some other factor surely. We're talking pennies on a BoM, and I'm certain some high end keyboard manufacturer would love to tout a better usb controller, etc.
- p_l 7y agoConsider the support costs involved in dealing with things like broken BIOSes that don't send "switch to boot protocol" command and similar. Cost of electronics is not everything.
- ChickeNES 7y ago> Some keyboards also do that to support OSes that have broken HID drivers, like Mac. What's broken on macOS?
- p_l 7y agoDon't remember full details, but essentially something was broken in handling of HID reports for keyboards combined with how input events were handled in upper layers. Resulted in some keyboards having special cases for dealing with "NKRO" on Mac.
- rasz 7y agoNo, and it makes no sense. There are no fixed function USB HID controller chips. They are all microcontrollers with USB interface. Makes no difference from chip point of view if it reports being basic HID profile or a custom one. Besides you can even bitbang being 10 hid devices on a good old Arduino.
- baybal2 7y agoYes, but for most keyboard makers, they come preflashed, and are indistinguishable from dumb asics
- p_l 7y agoA cent here and there on manufacturing several hundred thousand units quickly adds up. And that's just the MCU used. The cost of replacing the MCU with something that can run USB1.1 instead of 1.0, cost of programming, cost of dealing with broken cases that don't support HID properly (for example BIOSes that don't send "boot proto only" command, or every Mac) quickly increase the total cost. And the margins are thin. And then there's the fact that even people who should know better often believe myths about USB being unable to report more than 6 keys - even if they are keyboard vendors who should know better and are making a high-enough margin to use better controller.
- rasz 7y ago>cent here and there someone counting cents will not use several microcontrollers + separate usb hub chip, where did you get that idea from anyway? >cost of replacing the MCU with something that can run USB1.1 instead of 1.0 http://www.os2museum.com/wp/how-fast-again/ http://www.os2museum.com/wp/how-fast-again/ there is no hardware difference between 1.0 and 1.1.
- p_l 7y agoWhat I found was that in Low Speed mode, the maximum packet size made it impractical to use anything but the Boot Protocol. As for counting cents - for majority of keyboards made, you'll get as little work done on the keyboard controller as possible. If they add a separate USB chip, it's usually logically separate from the keyboard anyway. When you reach the more fancy keyboards, you deal with another problem. Namely, what to do with all the broken software involved. Your priority for reducing costs is removing support calls, angry gamers calling when they can't change their overclocking parameters in BIOS, Macintosh users complaining the keyboard doesn't work at all, corporate/OEM clients returning keyboards because it is not possible to input password to McBuggy Disk Encryption and Employee Spyware v6.66 when the computer starts. Those limit your options when the budget for your fancy keyboard would provide for better microcontroller.