3 ms·
Still no cheap ARM board with SATA3 support. Still no ARM board with a decently powerful CPU, SATA3, NVME, PCI-E x16, USB3.2, and DDR4 slots. It looks like AR
by DeathArrow 7y ago
Still no cheap ARM board with SATA3 support.
Still no ARM board with a decently powerful CPU, SATA3, NVME, PCI-E x16, USB3.2, and DDR4 slots.
It looks like ARM boards are pretty much the same, unless you want them for a pretty niche application.
Also, software support is not quite the best.
- gjsman-1000 7y agoImagine if someone made a Snapdragon 865 SBC... Or if Apple made an A13 SBC. They'd make a killing.
- goda90 7y agoYou could always buy a $1000+ Snapdragon development kit. https://shop.intrinsyc.com/products/snapdragon-865-mobile-hardware-development-kit https://shop.intrinsyc.com/products/snapdragon-865-mobile-ha...
- nine_k 7y agoWhat would make such a board particularly cheap? The CPU would be cheaper than x86 but not dirt-cheap. It should be reasonably fast to make sense for sata3 or nvme. This implies fast RAM, too. If anything, the economy of scale won't be in favor of this board either, unless it's produced in millions.
- DeathArrow 7y agoWhy should it be fast to have SATA 3 support? They just have to integrate a SATA controller. NAS boxes have pretty weak CPUs and I thought these cheap ARM boards could be used in NAS if there was actual SATA 3 support.
- LargoLasskhyfv 7y agoYou mean like here? https://linux-sunxi.org/SATA https://linux-sunxi.org/SATA Just because it is implemented to tick a check box doesn't mean it is implemented in a good way...
- rjsw 7y agoThe HoneyComb LX2K comes closest to your specs, not particularly cheap though.
- DeathArrow 7y agoClose but still weak compared to x86. Ampere eMag would me more suited as an ARM workstation.
- snvzz 7y agoThis is despite common, cheap SoCs having PCI-e and DDR4 interfaces. This includes the SoC used in the RPI4. It would be a matter of making a proper breakout board. It could be a hobbyist project, like so many available. Order the board yourself and solder everything yourself. But nobody has bothered. I do wonder why. My intuition is that everybody is waiting for a friendly RISC-V SoC to do this with. That is, that nobody actually wants to support the ARM ecosystem. E.g. I used to like ARM when it was an UK-based company. This changed as it got bought, and I do even actively dislike them ever since their "get the facts" campaign against RISC-V.
- edgineer 7y agoOdroid HC1 and HC2 are based off Odroid XU4 with Exynos5422 but with a SATA3 connector. They make for a little NAS in DAS form factor, about $60 to $75
- ac29 7y agoNanoPi M4 ($50) has a quad SATA3 hat ($25). Not sure if that's what you meant by cheap, but its not terribly expensive. Couldn't comment on how well it works either, but the board itself is supported by Armbian on the most recent mainline LTS kernel (5.4). The Armbian system I have is rock solid, no complaints.
- LargoLasskhyfv 7y agoYes and No. Depends on what is cheap for you? There is the Marvell Espressobin http://espressobin.net/ http://espressobin.net/ at around 80US$. They also have the MachiatoBin, but that can't be considered cheap anymore, except if you need the two 10GB Ethernet ports. Honestly i don't get the need for SATA, because since USB3 this https://en.wikipedia.org/wiki/USB_Attached_SCSI https://en.wikipedia.org/wiki/USB_Attached_SCSI mostly compensates the lack of it. It's fast enough for the little things and has the added benefit of availability in ready to use enclosures, whith power delivery over USB @2.5 Inches. If you need more/faster, just use some recent Celeron @Mini-ITX, or so.