4 ms·
You just have to look at the BackBlaze hdd reports to know WD has been out of the game for a long time. What really upset me was when they bought HGST out in 20
by arminiusreturns 7y ago
You just have to look at the BackBlaze hdd reports to know WD has been out of the game for a long time. What really upset me was when they bought HGST out in 2012, but fortunately that management doesn't seem to have impacted the HGST quality as much as I feared, but time will tell.
Also, stop using raid 5 people. The risk of failure cascades given the build times on such large drives means it should be almost totally deprecated imho.
- lliamander 7y agoWhat should you use instead of RAID 5?
- bentolor 7y agoZRAID1 oder ZRAID2
- zozbot234 7y agoRAID 6 (adds an extra parity disk) or generalized erasure coding (more flexible but not so easy to manage).
- pessimizer 7y agoI still use RAID 5 for small 3/4-disk arrays; I think the odds are in my favor then. But if I need 4x disk size, I go to RAID 6 (so I jump from a 4-disk RAID 5 to a 6-disk RAID 6.)
- aaronmdjones 7y agoNitpick: RAID-5 and RAID-6 don't use "parity disks". They stripe the parity across every disk, just like RAID-0 stripes data, so you lose a disk worth of capacity (or two disks worth of capacity in RAID-6), but the parity is on every disk. Having a disk dedicated to parity would be an incredibly burdensome write bottleneck, which is exactly what RAID-4 is, and why you probably haven't heard of it.
- magicalhippo 7y agoRAID-10 (stripe of mirrors) is also an alternative. Not as cost efficient, but rebuild times should be much lower. Is also more flexible in some cases, like when using ZFS for example.
- dvdgsng 7y agoRAID 6
- arminiusreturns 7y agoRaid-6+ (16, 60, 100, etc), Raid-z2+ (raid-z1 being the equiv of raid-5), Ceph, etc
- lliamander 7y agoOK, good to know. So the process of rebuilding after having lost a disk will take less time with those other solutions?
- arminiusreturns 7y agoIt's not about the process taking less time (even though aiming to reduce that is a valid approach, which is usually tackled by using ssd/flash and not over-provisioning). It's much more about being able to handle a second disk failure during rebuild. With raid 5, if that happens, you are in a world of hurt (think 3k fees to send raid to data recovery place). I've learnt all this the hard way.
- lliamander 7y agoAh, makes sense. Thanks!