4 ms·
Ethernet everywhere, and more than you think you need, even if you don't terminate every connection. Put in Cat-6, as it's easier to pull, and future proof. E
by zdw 16y ago
Ethernet everywhere, and more than you think you need, even if you don't terminate every connection. Put in Cat-6, as it's easier to pull, and future proof.
Everywhere you think you might need one cable, put 2, need 2, put 4. In fact, 4 strands/room might not be overkill.
Where everything comes back to, put a patch panel - you can buy panels with 24 square slots and a bracket to hook it into the wall. I'd put this in a closet or utility room (laundry room/garage/etc.). Make sure that power and your other utility terminations (cable/phone/etc.) go there as well.
- RockyMcNuts 16y agoI would put architectural moldings that hide easily accessible duct where can run Ethernet for now. On house time scale, not sure Ethernet is future-proof, might want to run fiber or who knows what in 20 years. Twisted pair is only mass market for last 20 years. Or you might even want to run speaker wire or who knows what.
- dave1619 16y agoI'd just use wifi.
- mgarfias 16y agoNah, don't put cat5 or 6 everywhere. It's spendy, even if not terminated. And you're not going to use most of it. What you do is: put in conduit/flex tubes in the walls in every conceivable location and run them to a common distribution frame. THEN inside the conduit, you place pull string. When you need a drop, you simply tie the wire (and a new piece of poly pull string) to the existin pull string, pull the cable through, and terminate. And you're not limited to cat6. You Can drop coax, cat3/5/6, fiber, or whatever.