4 ms·
A small tilt like that wouldn't impact most water cooling systems. Most cooling systems would run with a 45 degree tilt, and some are completely sealed and wo
by londons_explore 7y ago
A small tilt like that wouldn't impact most water cooling systems. Most cooling systems would run with a 45 degree tilt, and some are completely sealed and would work any way up.
I suspect this isn't a water cooling problem, but instead a heat pipe system, with a phase change material in (often butane). Heat pipes are used to conduct heat from CPU's to heatsinks in most laptops. They have a liquid in which boils, and then condenses at the other end of the pipe, and then flows back again as liquid. Heat pipes usually look like a thick bar of copper, but are in fact way more thermally conductive than copper.
The inside of the pipe usually has a felt-like material to 'wick' water from the wet end to the dry end, but wicking is quite slow compared to guaranteeing the pipe is perfectly level and using gravity to just let the liquid flow downhill.
I'm 99% sure that's the reason this system doesn't work with a slight slope.
- londons_explore 7y agoInterestingly, if you have a heat pipe with a bend in the middle (most laptop heat pipes have a bend), then if you orient the laptop so the bent bit is down, you can make a 'liquid lock' so vapor can't flow from one end of the pipe to the other. If that happens, the heat pipe pretty much stops conducting heat, and you'll see far worse thermal performance.
- hinkley 7y agoSo that weird laptop stand that holds your laptop up at an angle... more cooling from below, but maybe the heat pipes aren’t as happy?
- deleted 7y ago[deleted]