5 ms·
Wiring and Cabling: How to Lace Cable Harnesses (1962)
- myself248 7y agoThis is the Navy manual. The stitch described here would be called a "running stitch" by a telephone installer, and is just one of several stitches in our repertoire. This PDF describes several more, including the starter, Kansas City, and Chicago: www.dslreports.com/r0/download/1377481~846610918062e1c57e36f03a5c37b426/lacing.pdf It does not include the "power stitch" or "H stitch", though this and the others are all over YouTube if you're curious.
- nemosaltat 7y agoThis was still taught, and tested on when I went through ETMS in 2014.
- wsh 7y agoBesides the technique, it’s also important to use the right kind of lacing cord. A current standard in telecommunications is nine-ply waxed polyester twine, traditionally in white or natural color. In aerospace, flat-braided lacing tape is sometimes used, in aramid (Nomex), glass fiber, or other materials suitable for more demanding conditions.
- stan_rogers 7y ago30 years later and my index fingers are still spontaneously repulsed by "NSN 4020-01-208-7645: TAPE, LACING AND TYING". Tough stuff, much tougher than the skin of a person's knuckle joints. Military aircraft are mostly made out of wire.
- sdfjkl 7y agoThe problem with these laced harnesses is the same as with zip-tied ones - you can't add or remove anything (without destroying it or making a mess of it, unless you re-tie/lace everything), and that it's difficult to use the simplest and fastest method of wire tracing, which is tugging on it and seeing where it goes. Therefore the currently best method is IMHO a slotted wire duct. Put the cover on and it's neat and tidy, but easy to pull the cover off, add or remove wires and trace where they go. That's probably why that method is now industry standard. Example here, with cover on in the middle and covers removed top and bottom: https://blog.hellermanntyton.de/wp-content/uploads/2017/01/Panel_Builder_Overview_DE_01850px.jpg https://blog.hellermanntyton.de/wp-content/uploads/2017/01/P...
- ape4 7y agoYes I use velco ties for that reason.
- myself248 7y agoYes, this technique is not appropriate where wires are added or removed frequently. It's appropriate where you need extreme density, or inside portable equipment where wires not secured to each other may abrade each other.
- abakker 7y agoAnother downside to it is EMI. tying all the wires tight together increases the odds of any EMI problems vs letting them be loose in the wire duct. In a previous CNC machine, I zip tied everything together very carefully, but was getting phantom steps in one of my steppers (even with shielded wires). Unclipping the zip ties caused the problem to go away. (after that, I added plenty of ferrites, too, as a measure of safety, but clipping the zip ties killed the only real symptom)
- JohnJamesRambo 7y agoAlso heat. Wires bunched up tight can’t cool themselves down as well.
- jascii 7y agoIf heat is an concern, you'd probably want to spec a thicker gauge wire.
- XMPPwocky 7y agoYes, but (especially when Cu and Al are pricy) being able to use a thinner gauge can be a big benefit.
- tylerl 7y agoRegardless of wire gauge, bundles of wire noticably reduce your heat dissipation ability and therefore reduce your safe current carrying capacity accordingly. That's why electrical code significantly de-rates the current capacity of circuits which run more than just a few conductors in a single conduit or through the same hole.
- klodolph 7y agoI recently started using this technique. I love it. It's not too hard to learn how to do it in a functional sense. I don't need to do it well, just tie up some cables. Whether it's useful depends on how often you are adding or removing cables. It's not a fast technique. I use it for my PC monitors + keyboard + mouse + audio, and it's been much less of a hassle because the wires don't get tangled any more. The real boon is in my audio equipment. For example, I have a (musical) keyboard, and that needs 10' 2x audio + 2x MIDI. Having those cables tied together has made a huge difference, preventing them from getting tangled with other cables, and making it easier to keep them out of the way. I also have a 19" rack of audio equipment, and I use this technique in the back of the rack. Barring equipment failures, I don't expect to change anything in the rack for the next few years. It's functionally equivalent to using lots of zip ties or velcro ties, and most useful if you have e.g. multiple cables that that traverse the same 10' distance.
- myself248 7y agoFor that use, I would get some Techflex F6 split sleeving, or some of the velcro-closure stuff. Not only does it hold them together, it also provides quite a bit of protection from abrasion if you drag the resulting "snake" around the floor or whatever. The problem with lacing an assembly that might flex, is that the cord keeps the cables from sliding against each other, and makes the assembly very stiff. So any flexing force is concentrated at points where it can overcome that stiffness, and this is bad for the cables long-term. Inside equipment, lacing is used to keep wires from abrading against each other. In an office, it's used to secure them to frames for density, organization, and seismic reasons. In all cases, every piece of connected equipment is rigidly mounted, and no part of the laced form ever has to move relative to any other part.
- econcon 7y agoSome days ago I was looking to make a lat pulldown DIY setup for home use, I had hard time finding suitable pulley for the purpose. Most cables and pulley I found got abraded fast.
- 7177Y 7y agoI'm interested. How does this relate?
- russfink 7y agoLooks like what I learned in scouts, vis. lashing a rope end.
- zokier 7y agoOne example where cables are laced down is Curiosity rover, as noted in this forum thread: https://igkt.net/sm/index.php?topic=4028 https://igkt.net/sm/index.php?topic=4028