4 ms·

I did my own little experiment with masks which you can also easily repeat the experiment yourself. Note that this works on the regular masks you can buy from

I did my own little experiment with masks which you can also easily repeat the experiment yourself. Note that this works on the regular masks you can buy from regular shops such as convenience stores that the general public mostly wears. Put on the mask in cold weather or a chill room and then take a deep breath and breathe out. You will notice a lot of steam is coming off around the sides of the masks and especially around the nose area where these masks are not sealed. Worse if you cough of sneeze! This is even more so after the mask has been worn for some time and gets soggy. Next, go outside and ask your friend to light a cigarette and exhale smoke in your face while you take a deep breath through your nose. (Wearing the mask as you would normally do). You will find a lot of smoke gets around the mask, mostly around the edges around the nose. You can make your own conclusions from there. My conclusion was that these things are mostly toys and the majority of people wearing them either do not fit them correctly or do not change often or both, and they also may be putting too much confidence in them.

scarejunba 7y ago
Mask fit is important and that's why fit tests evaluation is done for medical professionals so what you're saying has basis. I wonder if the decreased number of pathogens makes it a different story, though. For instance if you cut down encountered viral load by 95% do you still have equal likelihood of illness?
- asdff 7y ago
  It only takes one virus to infect a host.
- istjohn 7y ago
  My understanding is that the illness will be more severe if the patient was exposed to a higher viral load.
saurik 7y ago
As I imagine you are expecting to test for smoke in that case by seeing if you can smell it: of course you can smell it, as what you are smelling there is a gas. An N95 mask filters particles larger than some reasonably large size, which hopefully includes giant encapsulated viruses filled with genetic material but is not going to include the odor from smoke which is made up of individual molecules of stuff like syringol. An N95 mask is not some kind of "only oxygen and nitrogen and carbon dioxide (and whatever else you absolutely need from air)" filter: it is just that most scents thankfully aren't harmful, but happen to be correlated with stuff that is. FWIW, when I wear an N95 mask I do not get steam from its edges (that is either a ludicrously poor fit or you are expecting to be able to breath out too quickly for your mask design), but you also need to remember that breathing out is "safe" while breathing in is not, and yet the pressure in the two cases is very different, so something can be very effective even if it has the issue you are complaining about (and some masks are even designed specifically like that, with pressure vents to make breathing easier so you can exhale quickly without a problem and then pull air in more slowly where the feedback is more clear).
- KaiserPro 7y ago
  This a thousand times. I wear a p3 mask to cycle to work, because I work in central london and don't want to fill my lungs up with crap(as fast). a P3 mask filters 99% of >0.3 micron particles. It stops diesel fumes, but not smell. I've not tried it with wood smoke, but I suspect that'll fill up the filters much quicker. you can 100% smell sewers still. I have recently got some filters that claim to get rid of "troublesome" smells as well, by bundling a carbon filter on the inside. I was forced to by these as everyone had panic bought normal filters. When I replace my filters next week, I'll see if it makes a difference.
- Reelin 7y ago
  > giant encapsulated viruses filled with genetic material Somewhat tangential, but viruses are actually _really_ small. Some approximate sizes for comparison: * Pollen: 20 - 35 um * E. coli: 2 um * HEPA filter: 99.97% capture at 0.3 um * N95: 95%+ at 0.1 - 0.3 um [1] * Sterilizing filter pore size: 0.22 um * Virus: 0.004 - 0.1 um Even the sterilizing filter in the lab doesn't remove viruses. I'm not actually sure what mechanics are going on in this case that allow an N95 to protect you. [1] https://www.ncbi.nlm.nih.gov/pubmed/9487666 https://www.ncbi.nlm.nih.gov/pubmed/9487666
  - ve7ftz 7y ago
    Masks actually have kind of a funny response curve (see 5th page of linked PDF). The masks are basically made out of layers of tiny (as small as 1um) fibres that force the air to weave through them to get to you. Larger particles tend to hit fibres on their way through, while smaller ones tend to get pushed out of the way of bigger things like air molecules rushing through and get bumped into the fibres and captured. The things that get though are the ones in the sweet spot of being small enough to make their way around the fibres in the air, but large enough to not simply be knocked out of the path by the air molecules themselves. The lowest efficiency is around 0.04-0.1um on the models tested (so perfect range for most viruses) but even then they were still only dropping to like 94% effectiveness. I expect “94% effective” is still enough to see a significant different but that’s just my gut feeling. All kind of moot, though, as coronaviruses (per 4th page of linked PDF) are actually closer to 0.125um, which is veering back to 100% effectiveness. And if we expect that a lot of transmission is happening in droplets, those are much larger and easily caught by the filter. https://multimedia.3m.com/mws/media/409903O/respiratory-protection-against-biohazards.pdf https://multimedia.3m.com/mws/media/409903O/respiratory-prot...

scarejunba 7y ago

Mask fit is important and that's why fit tests evaluation is done for medical professionals so what you're saying has basis. I wonder if the decreased number of pathogens makes it a different story, though. For instance if you cut down encountered viral load by 95% do you still have equal likelihood of illness?

asdff 7y ago
It only takes one virus to infect a host.
istjohn 7y ago
My understanding is that the illness will be more severe if the patient was exposed to a higher viral load.

saurik 7y ago

As I imagine you are expecting to test for smoke in that case by seeing if you can smell it: of course you can smell it, as what you are smelling there is a gas. An N95 mask filters particles larger than some reasonably large size, which hopefully includes giant encapsulated viruses filled with genetic material but is not going to include the odor from smoke which is made up of individual molecules of stuff like syringol. An N95 mask is not some kind of "only oxygen and nitrogen and carbon dioxide (and whatever else you absolutely need from air)" filter: it is just that most scents thankfully aren't harmful, but happen to be correlated with stuff that is. FWIW, when I wear an N95 mask I do not get steam from its edges (that is either a ludicrously poor fit or you are expecting to be able to breath out too quickly for your mask design), but you also need to remember that breathing out is "safe" while breathing in is not, and yet the pressure in the two cases is very different, so something can be very effective even if it has the issue you are complaining about (and some masks are even designed specifically like that, with pressure vents to make breathing easier so you can exhale quickly without a problem and then pull air in more slowly where the feedback is more clear).

KaiserPro 7y ago
This a thousand times. I wear a p3 mask to cycle to work, because I work in central london and don't want to fill my lungs up with crap(as fast). a P3 mask filters 99% of >0.3 micron particles. It stops diesel fumes, but not smell. I've not tried it with wood smoke, but I suspect that'll fill up the filters much quicker. you can 100% smell sewers still. I have recently got some filters that claim to get rid of "troublesome" smells as well, by bundling a carbon filter on the inside. I was forced to by these as everyone had panic bought normal filters. When I replace my filters next week, I'll see if it makes a difference.
Reelin 7y ago
> giant encapsulated viruses filled with genetic material Somewhat tangential, but viruses are actually _really_ small. Some approximate sizes for comparison: * Pollen: 20 - 35 um * E. coli: 2 um * HEPA filter: 99.97% capture at 0.3 um * N95: 95%+ at 0.1 - 0.3 um [1] * Sterilizing filter pore size: 0.22 um * Virus: 0.004 - 0.1 um Even the sterilizing filter in the lab doesn't remove viruses. I'm not actually sure what mechanics are going on in this case that allow an N95 to protect you. [1] https://www.ncbi.nlm.nih.gov/pubmed/9487666 https://www.ncbi.nlm.nih.gov/pubmed/9487666
- ve7ftz 7y ago
  Masks actually have kind of a funny response curve (see 5th page of linked PDF). The masks are basically made out of layers of tiny (as small as 1um) fibres that force the air to weave through them to get to you. Larger particles tend to hit fibres on their way through, while smaller ones tend to get pushed out of the way of bigger things like air molecules rushing through and get bumped into the fibres and captured. The things that get though are the ones in the sweet spot of being small enough to make their way around the fibres in the air, but large enough to not simply be knocked out of the path by the air molecules themselves. The lowest efficiency is around 0.04-0.1um on the models tested (so perfect range for most viruses) but even then they were still only dropping to like 94% effectiveness. I expect “94% effective” is still enough to see a significant different but that’s just my gut feeling. All kind of moot, though, as coronaviruses (per 4th page of linked PDF) are actually closer to 0.125um, which is veering back to 100% effectiveness. And if we expect that a lot of transmission is happening in droplets, those are much larger and easily caught by the filter. https://multimedia.3m.com/mws/media/409903O/respiratory-protection-against-biohazards.pdf https://multimedia.3m.com/mws/media/409903O/respiratory-prot...