3 ms·
It's been 20+ years since 1 GbE came around, 10 GbE came in 2006, but for some reason the adoption has lagged hugely in SMB/consumer gear.
by fulafel 7y ago
It's been 20+ years since 1 GbE came around, 10 GbE came in 2006, but for some reason the adoption has lagged hugely in SMB/consumer gear.
- Cyph0n 7y agoNow that I’ve been working on service provider routers for a bit, anything lower than 100G sounds slow. All about perspective, I suppose.
- c2h5oh 7y ago1 Gbe is just marginally slower than consumer grade HDD and matches the fastest residential/SME internet connections. For most 1Gbe was a noticeable upgrade while 10Gbe isn't, while cost of hardware is noticeably higher. 10Gbe has decent adoption where it makes sense.
- icedchai 7y agoModern systems have NVME SSDs which can easily fill a 10 gig connection, both read and write speed. It would be nice to see higher speed ethernet on more hardware. I have some 10 gig equipment but it's a couple generations old ebay special.
- smueller1234 7y agoDisaggregated home SSD? Err, wow!
- fulafel 7y agoWhat do you mean by disaggregated? SSD is certainly cheap enough for home NAS now.
- pdimitar 7y agoOne of my external HHDs can work at 250MB/s which means 2GbE. I'd like my home NAS to have at least a 2.5GbE NIC and my router/switch have to be 10GbE so as I don't saturate them while transferring from/to the NAS. I also plan on adding a few 1080p@30fps security cameras and a centralised LAN host for all the video streams/backups. It will all add up quite quickly and I'm not even sure a home 10GbE setup will hold its own well in such conditions. I plan my buy an expensive switch/router combo with up to 320GbE bandwidth though, so it might work. I believe 10GbE will be with us for as the de-facto prosumer setup for quite a while since 1.25GB/s is going to work for 99% of what's needed out there. (Although uncompressed 4k@60fps is almost 2GB/s...)
- StillBored 7y agoIts been an artificial market segmentation ploy used by a number of vendors. That ploy is now failing since the primary users of 10G have moved on to faster standards.
- ClumsyPilot 7y agoAns we are finally starting to see residential high-speed internet at 1G becoming avaliable and widespread.
- jagger27 7y agoBell Canada even offers 1.5Gbps internet and ships a router that only has 1GbE ports, so I had to jump through some hoops to remove the SFP+ from the router they gave me and get it working on my pfSense box. I'm still limited on most of my network to 1Gbps, but at least a few hardwired machines have access to the full 1.5Gbps/1.0Gbps and 10Gbps locally. Things would be so much easier if all copper ports were at least 2.5Gbps, preferably 10Gbps.
- ClumsyPilot 7y agoThat's some serious dedication! I would like to upgrade my setup to higher speeds, but the cost of 2.5/5 Gbps networking gear is very difficult to justify. My entire kubernetes cluster is cheaper, and it's much better value/investment.
- Zenst 7y agoYou could always bond a couple of 1Gbps ports together, not as elegant, but certainly something hackable with what you have perhaps and with that - cheaper and good stop gap to eek out a little bit more life.